15576905280 西门子DP接头代理商

General information

Hardware product version

01

Firmware version

V3.2

Engineering with

• ● Programming package

STEP 7 V5.5 or higher

Supply voltage

Rated value (DC)

• ● 24 V DC

Yes

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

external protection for power supply lines (recommendation)

2 A min.

Mains buffering

• ● Mains/voltage failure stored energy time

5 ms

• ● Repeat rate, min.

1 s

Input current

Current consumption (rated value)

750 mA

Current consumption (in no-load operation), typ.

150 mA

Inrush current, typ.

4 A

I²t

1 A²·s

Power loss

Power loss, typ.

4.65 W

Memory

Work memory

• ● integrated

384 kbyte

• ● expandable

No

• ● Size of retentive memory for retentive data blocks

128 kbyte

Load memory

• ● Plug-in (MMC)

Yes

• ● Plug-in (MMC), max.

8 Mbyte

• ● Data management on MMC (after last programming), min.

10 y

Backup

• ● present

Yes; Guaranteed by MMC (maintenance-free)

• ● without battery

Yes; Program and data

CPU processing times

for bit operations, typ.

0.05 µs

for word operations, typ.

0.09 µs

for fixed point arithmetic, typ.

0.12 µs

for floating point arithmetic, typ.

0.45 µs

CPU-blocks

Number of blocks (total)

1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.

DB

• ● Number, max.

1 024; Number range: 1 to 16000

• ● Size, max.

64 kbyte

FB

• ● Number, max.

1 024; Number range: 0 to 7999

• ● Size, max.

64 kbyte

FC

• ● Number, max.

1 024; Number range: 0 to 7999

• ● Size, max.

64 kbyte

OB

• ● Size, max.

64 kbyte

• ● Number of free cycle OBs

1; OB 1

• ● Number of time alarm OBs

1; OB 10

• ● Number of delay alarm OBs

2; OB 20, 21

• ● Number of cyclic interrupt OBs

4; OB 32, 33, 34, 35

• ● Number of process alarm OBs

1; OB 40

• ● Number of DPV1 alarm OBs

3; OB 55, 56, 57

• ● Number of isochronous mode OBs

1; OB 61

• ● Number of startup OBs

1; OB 100

• ● Number of asynchronous error OBs

6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO)

• ● Number of synchronous error OBs

2; OB 121, 122

Nesting depth

• ● per priority class

16

• ● additional within an error OB

4

Counters, timers and their retentivity

S7 counter

• ● Number

256

Retentivity

• — adjustable

Yes

• — lower limit

0

• — upper limit

255

• — preset

Z 0 to Z 7

Counting range

• — can be set

Yes

• — lower limit

0

• — upper limit

999

IEC counter

• ● Number

Unlimited (limited only by RAM capacity)

S7 times

• ● Number

256

Retentivity

• — adjustable

Yes

• — lower limit

0

• — upper limit

255

• — preset

No retentivity

Time range

• — lower limit

10 ms

• — upper limit

9 990 s

IEC timer

• ● present

Yes

• ● Type

SFB

• ● Number

Unlimited (limited only by RAM capacity)

Data areas and their retentivity

retentive data area in total

All, 128 KB max.

Flag

• ● Number, max.

2 048 byte

• ● Retentivity available

Yes; MB 0 to MB 2047

• ● Retentivity preset

MB 0 to MB 15

• ● Number of clock memories

8; 1 memory byte

Data blocks

• ● Number, max.

1 024; Number range: 1 to 16000

• ● Size, max.

64 kbyte

• ● Retentivity adjustable

Yes; via non-retain property on DB

• ● Retentivity preset

Yes

Local data

• ● per priority class, max.

32 768 byte; Max. 2048 bytes per block

Address area

I/O address area

• ● Inputs

2 048 byte

• ● Outputs

2 048 byte

of which distributed

• — Inputs

2 048 byte

• — Outputs

2 048 byte

Process image

• ● Inputs

2 048 byte

• ● Outputs

2 048 byte

• ● Inputs, adjustable

2 048 byte

• ● Outputs, adjustable

2 048 byte

• ● Inputs, default

128 byte

• ● Outputs, default

128 byte

Subprocess images

• ● Number of subprocess images, max.

1; With PROFINET IO, the length of the user data is limited to 1600 bytes

Digital channels

• ● Inputs

16 384

• — of which central

1 024

• ● Outputs

16 384

• — of which central

1 024

Analog channels

• ● Inputs

1 024

• — of which central

256

• ● Outputs

1 024

• — of which central

256

Hardware configuration

Number of expansion units, max.

3

Number of DP masters

• ● integrated

1

• ● via CP

4

Number of operable FMs and CPs (recommended)

• ● FM

8

• ● CP, PtP

8

• ● CP, LAN

10

Rack

• ● Racks, max.

4

• ● Modules per rack, max.

8

Time of day

Clock

• ● Hardware clock (real-time)

Yes

• ● retentive and synchronizable

Yes

• ● Backup time

6 wk; At 40 °C ambient temperature

• ● Deviation per day, max.

10 s; Typ.: 2 s

• ● Behavior of the clock following POWER-ON

Clock continues running after POWER OFF

• ● Behavior of the clock following expiry of backup period

Clock continues to run with the time at which the power failure occurred

Operating hours counter

• ● Number

1

• ● Number/Number range

0

• ● Range of values

0 to 2^31 hours (when using SFC 101)

• ● Granularity

1 hour

• ● retentive

Yes; Must be restarted at each restart

Clock synchronization

• ● supported

Yes

• ● to MPI, master

Yes

• ● to MPI, slave

Yes

• ● to DP, master

Yes; With DP slave only slave clock

• ● to DP, slave

Yes

• ● in AS, master

Yes

• ● in AS, slave

Yes

• ● on Ethernet via NTP

Yes; As client

Digital inputs

Number of digital inputs

0

Digital outputs

Number of digital outputs

0

Analog inputs

Number of analog inputs

0

Analog outputs

Number of analog outputs

0

Interfaces

Number of industrial Ethernet interfaces

1; 2 ports (switch) RJ45

Number of RS 485 interfaces

1; Combined MPI / PROFIBUS DP

Number of RS 422 interfaces

0

1. Interface

Interface type

Integrated RS 485 interface

Physics

RS 485

Isolated

Yes

Power supply to interface (15 to 30 V DC), max.

200 mA

Functionality

• ● MPI

Yes

• ● PROFIBUS DP master

Yes

• ● PROFIBUS DP slave

Yes

• ● Point-to-point connection

No

MPI

• ● Transmission rate, max.

12 Mbit/s

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — Global data communication

Yes

• — S7 basic communication

Yes

• — S7 communication

Yes

• — S7 communication, as client

No; but via CP and loadable FB

• — S7 communication, as server

Yes

DP master

• ● Transmission rate, max.

12 Mbit/s

• ● Number of DP slaves, max.

124

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — Global data communication

No

• — S7 basic communication

Yes; I blocks only

• — S7 communication

Yes

• — S7 communication, as client

No

• — S7 communication, as server

Yes

• — Equidistance

Yes

• — Isochronous mode

Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO

• — SYNC/FREEZE

Yes

• — Activation/deactivation of DP slaves

Yes

• — Number of DP slaves that can be simultaneously activated/deactivated, max.

8

• — Direct data exchange (slave-to-slave communication)

Yes; As subscriber

• — DPV1

Yes

Address area

• — Inputs, max.

2 kbyte

• — Outputs, max.

2 kbyte

User data per DP slave

• — Inputs, max.

244 byte

• — Outputs, max.

244 byte

DP slave

• ● Transmission rate, max.

12 Mbit/s

• ● automatic baud rate search

Yes; only with passive interface

• ● Address area, max.

32

• ● User data per address area, max.

32 byte

Services

• — PG/OP communication

Yes

• — Routing

Yes; Only with active interface

• — Global data communication

No

• — S7 basic communication

No

• — S7 communication

Yes

• — S7 communication, as client

No

• — S7 communication, as server

Yes; Connection configured on one side only

• — Direct data exchange (slave-to-slave communication)

Yes

• — DPV1

No

Transfer memory

• — Inputs

244 byte

• — Outputs

244 byte

2. Interface

Interface type

PROFINET

Physics

Ethernet RJ45

Isolated

Yes

automatic detection of transmission rate

Yes; 10/100 Mbit/s

Autonegotiation

Yes

Autocrossing

Yes

Change of IP address at runtime, supported

Yes

Interface types

• ● Number of ports

2

• ● integrated switch

Yes

Media redundancy

• ● supported

Yes

• ● Switchover time on line break, typ.

200 ms; PROFINET MRP

• ● Number of stations in the ring, max.

50

Functionality

• ● MPI

No

• ● PROFINET IO Controller

Yes; Also simultaneously with IO-Device functionality

• ● PROFINET IO Device

Yes; Also simultaneously with IO Controller functionality

• ● PROFINET CBA

Yes

• ● PROFIBUS DP master

No

• ● PROFIBUS DP slave

No

• ● Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

• ● Web server

Yes

• — Number of HTTP clients

5

PROFINET IO Controller

• ● Transmission rate, max.

100 Mbit/s

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — S7 communication

Yes; With loadable FBs, max. configurable connections: 14, max. number of instances: 32

• — Isochronous mode

Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO

• — Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

• — IRT

Yes

• — Shared device

Yes

• — Prioritized startup

Yes

• — Number of IO devices with prioritized startup, max.

32

• — Number of connectable IO Devices, max.

128

• — Of which IO devices with IRT, max.

64

• — of which in line, max.

64

• — Number of IO Devices with IRT and the option "high flexibility"

128

• — of which in line, max.

61

• — Number of connectable IO Devices for RT, max.

128

• — of which in line, max.

128

• — Activation/deactivation of IO Devices

Yes

• — Number of IO Devices that can be simultaneously activated/deactivated, max.

8

• — IO Devices changing during operation (partner ports), supported

Yes

• — Number of IO Devices per tool, max.

8

• — Device replacement without swap medium

Yes

• — Send cycles

250 μs, 500 μs,1 ms; 2 ms, 4 ms (not in the case of IRT with "high flexibility" option)

• — Updating time

250 µs to 512 ms (depending on the operating mode, see Manual "S7-300 CPU 31xC and CPU 31x, Technical Data" for more details)

Address area

• — Inputs, max.

2 kbyte

• — Outputs, max.

2 kbyte

• — User data consistency, max.

1 024 byte

PROFINET IO Device

Services

• — PG/OP communication

Yes

• — Routing

Yes

• — S7 communication

Yes; With loadable FBs, max. configurable connections: 14, max. number of instances: 32

• — Isochronous mode

No

• — Open IE communication

Yes; Via TCP/IP, ISO on TCP, and UDP

• — IRT

Yes

• — PROFIenergy

Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device

• — Shared device

Yes

• — Number of IO Controllers with shared device, max.

2

Transfer memory

• — Inputs, max.

1 440 byte; Per IO Controller with shared device

• — Outputs, max.

1 440 byte; Per IO Controller with shared device

Submodules

• — Number, max.

64

• — User data per submodule, max.

1 024 byte