产品库
登录
首页 找仪器 社区 百科 新品 供应商 品牌 应用 资料 仪企号 展会 标准 求购 招中标

FSIQ26 FSIQ26频谱分析仪，二手FSIQ26

产品信息

R&S FSIQ26 矢量信号分析仪     

    

技术指标

Aging per day1.10-9
Aging per year^1)2.10-7
Marker resolution0.1Hzto 10kHz(dependent on span)
Frequency counter resolution0.1Hzto 10KHz(selectable)
Displayrange for frequency axis0Hz,10Hzto full span
Display range with digital demodulationNumber of displayed 
symbols
Symbolrade≤1Mhzmax.1600 symbols(4points per sym-bol)
Symbol rate>1MHz to <3.2MHz1/2x symbol rate/MHz*1000sym-bols in 
steps of 100 symbols
Symbolrate≥3.2MHzmax.1600 symbols(4points per sym-bol)
Display range with analog demodulation(3500/demodulationbandwith/Hz)s
Sweep
Display range 0Hz1μs to2500s in 5% steps
Display range≥10Hz5msto 16000 s in steps≤10%
Sampling rate50ns(20Mhz A/D converter)
Numberof pixels(x axis)500
Resolution bandwidths with spectrum display
Anglog filter 
3dB bandwidths1Hz to 10MHzin 1/2/3/5 steps
Shape factor60:3dB
<1kHz<6
1kHz...2MHz<12
>2MHz<7
Video bandwidths1Hzto 10MHz in 1/2/3/5steps
FFT filter 
3dB bandwidths1Hzto 1kHz in 1/2/3/5 steps
Shape factor 60:3dB2.5nominal
Max.display range100dB
Inherent spurious response<-100dBm
Level 
Display rangenoise floordisplayed to 30dBm
Maximum inputlevel RF attenuation 0dB
DC voltage0V
CW RF power20dBm(=0.3W)
Pulse spectral density97dBμV/MHz
RF attenuation≥10dB
DCvoltage0V
CWRF power30dBm(=1W)
Max.pulse voltage150V
Max.pulse energy(10μs)1mWs;0.5mWs
1dB compression of input mixer(0 dB RF attenuation)
Intermodulation+10dBmnominal
Second harmonic intercept
point (SHI)>25dBm,typ.>35dBmat f<150Mhz
>40dBm,typ.>45dBm at f>150MHz
Leveldisplay
Screen500*400pixel(one diagram),max.
2 diagrams with independent settings
Loglevel axis10 to 200dB,in steps of 10dB
Linear level axis10%of reference level per level divi-sion,
10 divisions or logarithmic scal-ing
Tracemax.4(withtwo diagrams on screen,max.
2 per diogram);quasi-analog display 
of allresults
Trace detectorMaxPeak,Min Peak,Auto Peak(Normal),
Sample,RMS,Average
TracefunctionsClear/Write,Max Hold,Min Hold,Average
Setting range of reference level
Logarithmiclevel display-130dBm to 30dBm,insteps of 0.1dB
Linear level display7.0nVto 7.07V in steps of 1%
Unitesof level axisdBm,dBμV,dBmV,dBpW(loglevel display)V,A,W,dBμA(linear level display)
Totalmeasurement (0 to -50dB,S/N>15dB,span/RBW<100)(95% 
confidence level)
<2.2GHz<1dB
2.2Ghz to 3.5/7Ghz<1.5dB
7Ghz to 18Ghz<2.5dB
18Ghz to 26.5Ghz<3dB
Measurement of digital modulation signals
Modulation formats
BPSK,QPSK,OffsetQPSK,DQPSK,л
/4DQpsk,8psk,16QAM,MSK,GMSK,2FSK,2GFSK,4FSk,4GFSK
Selectable Standards
W-CDMA,Q-CDMA(IS-95)Forward/reverse,GSM,NADC,TETRA,PDC,PHS,
CDPD
Filters
Filteringraisedcosine,square root raised cosine,Ganssian
Settingrange α/B*T0.2 to 3 in steps of 0.01
Filters to specific standards
FLEXBesse B*T=1.22 and 2.44
ERMESBesselB*T=1.25
CDMA(IS 95)forwardand reverse channel
APCO 25FM 
Symbol rate 
Symbol rate320Hzto 6.4Mhz
(symbol rade*(1+α)<8MHz
Samples/symbol 
Symbol rate≤200kHz1,2,4,8,16
200kHz1,2,4,8
Symbol rate>400kHz1,2,4
Synchronizationinternalto symbol clock andfrequency/phase
Levelmeasurements with digital demodulation
Peak powerrange-60dBm to +30dBm
Absoluevel errorMean power(0dB to -10dB below reference level)
f≤2.2GHz1dB
2.2GHz to 7Ghz1.5dB
7Ghz to 18Ghz2.5dB(FSIQ7/26)
18Ghz to 26.5GHz3dB(FSIQ7/26)
Dynamic range for burst measurement
(meanpower ,ref.level≥10dBm,
power=ref.level+1dB,
low-noise mode,points/symbol<4,
nominal values 
 
W-CDMA 60dB
GSM 74dB
NADC 78dB
TETRA 79dB
Timereference(nominal)
without clock synchronization
MSK/GMSK modulation,
PSK/QAM/FSK modulation
with clock synchronization
<1/(2*symbol rate.points/symbol)
<1/(2*symbol rate)
<0.001*1/(symbolrate)
Residual error in modulationmeasurement
(data valid for level from referencelevel to reference level
-6dB,S/N>60dB,α/BT=0.3 to 0.7,number of demodulatedsymbols
>100,averaging≥10,analog bandwidth>10*symbol rate,input frequency
>15*symbol rate,local suppression at 0Hz input frequency adjusted),
symbolrate(1+α)≤8MHz
Frequency error±(symbolrate*5*10^-6+0.1Hz+reference error*carrier frequency)
I/Qoffset error0.2%(-54dB)
Errorwith modulation standard
GSM900/1800/1900phaseerror≤0.5°rms,
typ.<1.5° peak
NADC,CDPDEVM≤0.5°rms,typ.<1.5%peak
TETRA,PDC,PHSEVM≤0.7°rms,typ.<2%peak
PWTEVM≤1°rms,typ.<3%peak
IS-95 CDMA,forward/reversechannel
p factor≥0.9995
W-CDMAEVM≤1.8%rms,typ.<5%peak
Measurement of analog modulation signals
Demodulationbandwidth
Realtime demodulation5khzto 200kHz in steps of 1,2,3,5
Offlinedemodulation5kHz to 5MHz insteps of 1,2,3,5
Demodulation length
(max.sweeptime)		3500/(demod.bandwith/Hz)s
Readout 
Trace with AF signal,carrier power (Am DC-coupled),or modulationsumma-ry(table)with numerical display of :peak and rms values of modulation depthsor deviations of main demodulation;
SINAD value 1kHz(only with realtime demodulation);AFfrequency;carrier power;peak values of incidental modulation
Thefollowing specifications are valid for demodulation bandwidth≤2MHz,resolutionbandwidth≤2MHz,resolution bandwidth≥5*demodulation bandwidth,RF input level≤-10dBm,referencelevel setting=peak input level+0 to +6dB.
Amplitudedemodulation
Rangeupto
AF 
Offline demodulation0.001to 0.2*demod.BW
Realtie demodulation30Hzto 0.2*demod.BW,
max.20kHz
Frequencydemodulation
Deviation rangemax.0.4*demod.BW
AF 
Offline demodulationDC/0.001to 0.2*demod.BW
Realtime demodulationDC/30Hzto 0.2*demod.BW,
max.20kHz
Phase demodulation 
Deviation rangeupto 10 rad
AF 
Offline demodulationDC/0.001to 0.1*demod.BW
<(0.4*demod.BW)/(phase devia-tion/rad)
Realtimedemodulation200Hz to 0.1*demod.BW,max.
15kHz<90.4*demod.BW)/(phasedeviation/rad),
smaller limit values apply
Measurementof unmodulated carrier power
Measurement error,
(ref,level to ref.level-30dB)
1.5dB
SINAD measurements
Realtimedemodulation
AF=1kHz±4*10^-4*demod.BW
Error with 6 to 54 dB SINAD
±1dB
+error due to demodulator SINAD
Displayof AF frequencies
Range
Offline demodulation0.001to 0.3*demod.BW
Realtime demodulation30Hzto 0.3*demod.BW,
max.20kHz
Resolution1mHzto 1Hz
Error(S/N≥40dB)1.10^-6*demod.BW+errorof refer-ence frequency_1mHz±1 digit
AF filters 
Realtime demodulation
Lowpass3kHz,15kHz(Butterworth,12dB/oct.)
Highpass30Hz,300Hz(6dB/oct.))
Weighting filtersCCITT P.53,Cmessage
Offline demodulation 
Lowpass5%,10%,25% ofdemod.BW,(12dB/oct.)
Audio demodulation
Modulation modesAM and FM
Audio outputspeakerand phone jack
Marker stop time in spectrum mode100msto 60s
Squelchadjustablewith level line
Trigger functions
Trigger 
Span≥10Hz
Span=0Hz		freerun,line,video,Rf level,external
plus pretrigger,posttrigger,trigger delay
with digitaldemodulationplusburst trigger and synchronization 
to bit sequence(max.32 symbols)
with analog demodulationplustrigger to demodulated AF
Gated sweep,trigger sourceexternal,RFlevel
Gate delay1μsto 100s
Gate legth1μsto 100s,resolution min.1μs or
1% of gate lenth
Errorof gate lengthμ(1μs+(0.05%*gaenth))
Inputs and outputs(front panel)
RF inputNfemale,50Ω
FSIQ26 onlyadaptersystem,50Ω,N/3.5mm male and female
VSWR(RFattenuation>0 dB)<1.5(f<3.5GHz)
Attenuator0dB to 70dB,switchablein 10dB steps
Probe power supply+15/-12.6VDC,max.150mA
Supply and coding connector
for antennas,etc)±10V,max.100mA,ground
AF outputXout=10Ω,JK34jack
Reference frequency
Output,usable as input
BNC female,10MHz,10dBm nom.
Input1Mhzto 16MHz,>0 dBm from 50Ω
SweepoutputBNC female,0V to +10V,propor-tionalto displayed frequency
Power supply for noise sourceBNCfemale,0v and 28V,switched
Externaltrigger/gate inputBNCfemale,>10kΩ
-5V to +5V,adjustable
IEC/IEEEbus remote controlIEC 625-2(IEEE 488.2),SCPI1994.0
Serial interfaceRS-232-C(COM1and COM2)
Mouse interfacePS/2compatible
Printer interfaceparallel(Centronics compatible)orsprial
(RS-232-C)
Keyboard connector5-pinDIN female for MF2 keyboard
Userinterface25-pin Canon female
Connector for external monitor(VGA)15-pin female
3rd-order intermodulation
Intermodulation-free dynamic range,level2*-20dBm,△f>5*RBW or10kHz,whichever
is the greater value
FSIQ26>74dBc for f>150MHz(TOI>17dBm,typ.22dBm)
>60dBc for f>7Ghz(TOI>10dBm)
Displayedaverage noise level (DANL)
(0dB RF attenuation,RBW10Hz,VBW=1Hz,20averages,trace average
span 0Hz,termination50Ω)
VBW=1Hz,20 averages,trace average span 0Hz,termination50Ω)
 FSIQ3
Frequency:20Hz<-80dBm
1kHz<-110dBm
10kHz<-125dBm
100kHz<-135dBm
1Mhz<-145dB,typ.-150dBm
10GHz to 6Ghz<-145dBm,
6Ghz to 7Ghz-
7Ghz to 18Ghz-
18Ghz to 26.5GHz-
Maximum dynamic range 
1dB compression to DANL(1Hz)
170dB165dB
Inherent error on modulation measurements
General modulation modes(except FSK)
Error vector magnitude(EVM)and magnitude error(f<1Ghz)^1)
symbol rate^1)FSIQ26
≤30kHz0.7%rms
30kHz to 300kHzq1.4%rms
300kHz to 1MHz2.8%rms
1Mhz to 4.2Mhz2%rms
4.2MHz to 6.4MHz2.4%rms
Phase error(f<1GHz)^2)
Symbol rate
≤30kHz0.4°rms
30kHz to 300kHz0.7%rms
300kHz to 1MHz2%rms
1Mhz to 4.2Mhz2%rms
4.2MHz to 6.4MHz2.8%rms

========================================================================

深圳市迈凯瑞仪器仪表有限公司

，成色新，测试合格后再付款，欢迎体验测试，售后服务好

  ：张敏  ： -806

                 

                 ：coco@maikairui.com

        地址：深圳市龙华新区东环一路天汇大厦D栋6楼D-615室 

========================================================================

 

人生不如意者十之八九，当你面对突如其来的变故时，有一个叫做坚强的家伙已经在你翟海里根植，它时刻提醒你面对困难，请用你的智慧和毅力去克服；面对不幸，请用你的真诚和微笑去感动；面对磨难，请用你低心去品味；面对残缺和不的人生，请用坦然去接受。当你面对繁花锦簇的二手仪器市场时，请用你的睿智和独到眼光去探寻！I believe you can do it  

信息声明：本产品供应信息由仪器网为您整合，供应商为（深圳市迈凯达仪器仪表有限公司），内容包括 （FSIQ26 FSIQ26频谱分析仪，二手FSIQ26）的品牌、型号、技术参数、详细介绍等；如果您想了解更多关于 （FSIQ26 FSIQ26频谱分析仪，二手FSIQ26）的信息，请直接联系供应商，给供应商留言！
供应商产品推荐
    您可能感兴趣的产品