LY-010淋雨试验箱 重庆银河仪器淋雨试验箱

淋雨试验箱 rain simulation test chamber 型号：LY-08000工作室尺寸： D3000*W2000*H2000mm Type: LY-080 00working room dimension: D2000*W2000*H2000 特点 采用瑞士Bystronic 集团AFM公司的数控成套加工设备加工（含数控剪板机、数控液压折弯机、32 工位塔冲床等） 采用瑞士Bystronic集团激光切割机数控加工设备加工 采用德国Wagner全自动静电喷塑流水线数控设备加工 采用“阿克苏”塑料粉末喷涂加工 Rain simulation test chamber: Test space volume: 2000*2000*2000mm; The intensity of the rain: adjustable up to 20mm/min.; Spray with any one side or together with the four sides and top at an angle of 40-45 degrees. Temperature range of sprayed water: should be lower than the temperature of the specimen for 5…10C; Door: 2000*2000mm; Turntable for the test specimen; 二、箱体结构 structure 1、试验箱为单层SUS304不锈钢板，外壳表面进行拉丝发纹处理，内胆为优质不锈钢2B板。 Single-layer SUS304 stainless sheet, with drawing hairline treatment in the surface. Superior stainless steel 2B for the interior 2、喷水管也采用不锈钢制造；喷嘴可调；atomizer is made by stainless steel; adjustable atomizer 3、工作室及其它所有接触水的部位均采用不锈钢或铜质材料。Working room and all parts that contract with water are made by stainless steel or copper material. 三、控制系统 control system 1、 调速装置：摆管及转盘调速均采用进口变频器。Speed adjustment device: the speed adjustment for swing pipe and rotation plate is realized by imported inverter 2、 主要配置：储水箱、水泵、减压分流装置、压力记、流量计、喷水管组件、摆管摆幅驱动机构、工作台旋转机构、电器控制系统、可视钢化玻璃门、玻璃刮水器、减速机构等。 2.Main configuration: water storage tank, water pump, pressure reduction fluid diversion ,pressure regulator, flow meter, atomizer fit, swing pipe driving system, working table rotation system, electrical control system, visual tempered glass, speed reduction system 四、安装调试：installation and calibration 供方负责安装调试操作介绍（直到需方员工独立操作为止）；