Simple pressure generation for laboratories, workshops or on site
For testing, adjusting and calibrating all types of pressure measuring instruments
Hydraulic pressure generation up to 700 bar resp. 1,000 bar
Special Features
Ergonomic handling
Precise setting of pressure via a fine adjustment valve
Compact size
Low weight
Hand test pump BST1000-H
Description
Areas of application
Test pumps are used in generating pressure for the testing, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparative measurements. These pressure tests can be carried out in laboratories, workshops or on site at the set measuring point.
The hand test pumps CPP700-H and CPP1000-H were developed especially for generating test pressures on site.
Ease of operation
When the device under test and a suitably accurate reference measuring instrument are connected to the test pump, after actuating the pump, the same pressure will act on both measuring instruments. Calibration or adjustment of the device under test can be carried out by comparing the two measured values at any pressure value. In order to enable the accurate generation of the measuring points, the test pump is fitted with a fine adjustment valve.
As pressure transmitting medium hydraulic oil or clean water, free of calcium-carbonate / scale can be used.
