PGS10 WIKA PGS10 switch GAUGE 带开关触点的塑壳电接点...

   Special features
     High switching reliability and long service life
     Design per EN 837-1
     Pressure indication over 270 angular degrees
     Preset contact （adjustable between 10 and 90 % of the scale range）

   Description

   Design
    per EN 837-1

   Nominal size in mm
    40, 50

   Accuracy class
    2.5

   Switch point tolerance
    ±4 % of full scale value factory-set

   Scale ranges
    0 ... 2.5 to 0 ... 400 bar

   Pressure limitation
    Steady:      3/4 x full scale value
    Fluctuating: 2/3 x full scale value
    Short time:  Full scale value

   Permissible temperature
    Ambient: -20 … +60 °C
    Medium: +60 °C maximum

    Temperature effect
    When the temperature of the measuring system deviates
    from the reference temperature （+20 °C）:
    max. ±0.4 %/10 K of the span

   Process connection
    Cu-alloy, male thread lower mount or centre back mount

   Pressure element
    Cu-alloy
    ≤ 100 bar: C-type
    > 100 bar: Helical type

   Movement
    Cu-alloy

   Dial
    Aluminium, white

   Pointer
    Plastic, black

   Case
    Plastic

   Window
    Polycarbonate

   Ingress protection
    IP 41 per EN 60529 / lEC 529

   Helium leak test
    Leak rate 10-5 mbar*l/s

   Electrical data
    Switching voltage: DC / AC 4.5 ... 24 V
    Switching current: 5 ... 100 mA
    Contact load: max. 2.4 W
    Switch contact: Normally closed （NC） or normally open （NO）

   

    Contact setting: To customer requirements （if not specified, to mean value of the scale range）
    Contact adjustment: Adjustable between 10 and 90 % of the scale range  
    Potential-free

   Electrical connection
    Cable outlet, standard length 2 m

   Options
     Other process connection
     Other scale ranges
     Other cable length

   Dimensions in mm

    Standard version
   

   Ordering information
    Model / Nominal size / Scale range / Connection size / Connection location / Switch point and function / Options