CIP620 示波器隔离探头
- 型号：CIP620
- 产地：杭州
- 供应商：北京岳立天成科技有限公司
- 供应商报价：面议
- 标签：示波器隔离探头,-1,北京岳立天成科技有限公司
产品库
CIP620隔离探头 业界*款 DC-200MHz隔离探头
简介
CIP620隔离探头由一个安全绝缘的无源探头和一个宽带隔离放大器组成，输入端和输出端之间完全电气隔离或称绝缘,带宽从DC到200MHz，动态范围从1mV 到 1.5kV，额定隔离耐压600V CATIII/1000V CATII，它是隔离、浮地和差分测试的通用型探头。
产品性能
DC-200MHz宽带线性隔离技术，输入与输出完全电气隔离
额定浮地测量电压600V CATIII/1000V CATII
输入端与输出端绝缘电阻大于2000兆欧
带宽DC-200MHz，上升时间小于1.8ns
极宽动态范围， 从1mV 到 1.5kV
灵活的衰减或放大选择，从1/1000 到x1，x5
高共模YZ比，适合高压开关脉冲测量
输入侧为绝缘改良的传统无源探头，符合使用习惯
输出侧可连接任何示波器
内置锂电池
应用领域
开关电源、变频器、UPS不间断电源行业
太阳能、风电变流器行业
LED灯、路灯、节能灯照明行业
高校电力电子、电机实验与科研
工业现场测试调试
汽车电子系统测试
电力设备行业
型号与规格
| 型号 | CIP605 | CIP610 | CIP620 |
| 带宽 | 50MHz | 100MHz | 200MHz |
| 上升时间 | <7ns | <3.5ns | <1.8ns |
| 隔离耐压 | AC 3000Vrms/1min ，额定600V CATIII / 1000V CATII | ||
| 有效测量范围 | 1.0mV – 1.5kV | ||
| 放大或衰减档位 | x5*，x1* ，1/2，1/10，1/20，1/100，1/200，1/1000 | ||
| 输出信号幅值 | 0～±1.5V | ||
| 输入阻抗 | 10MΩ/9pF （当采用10x无源探头） | ||
| 输出阻抗 | 50Ω | ||
| 其他功能 | AC/DC开关，超量程报警，电池电压低/充电指示灯 | ||
| 输入探头长度 | 1500mm | ||
| 输出电缆长度 | 300mm | ||
| 隔离放大器盒尺寸 | 130mmx46mmx28mm | ||
| 隔离放大器盒重量 | 不含电池90g ，带电池180g | ||
| 工作电源 | DC 5V–9V，500mA | ||
| 充电电源 | DC 9V , 800mA | ||
| 电池 | 7.4V/2200Mah 锂电池 | ||
*需配合1:1无源探头实现
CIP610 serial Isolation Probe
The first DC-200MHz Isolation Probe in the Industry
INTRODUCTION
CIP610 serial isolation probe is composed of an insulation-enhanced passive probe and a wideband isolation amplifier. It’s totally electrical isolated between its input and output. The bandwidth is from DC to 200MHz, its dynamic range is from 1mV to 1.5kV,rated for 600V CATIII/1000V CATII floating test. CIP610 serial is a universal tool for isolating test, floating test and differential test.
FEATURES
Patented DC-200MHz wideband linear isolation technology, electrical isolated between input and output,
Insulation voltage 3000V/1min,Rated for 600V CATIII/1000V CATII
Wide dynamic range, from 1mV to 1.5kV
Flexible attenuation or gain selection, from 1/1000 to x5
High CMRR, suitable for high voltage pulse measurement
The input is an insulation-enhanced passive probe, suits user's convenience.
Compatible for any oscilloscope
APPILICATIONS
Floating Measurements
SMPS, UPS, Motor driver Design
Photovoltaic, Wind turbine Inverters Design
LED Lamp, Road Lamp, CFL Design
Electronic and Electrical engineering Education
Automotive Design and Test
Power equipment design and test
SPECIFICATIONS
| Model | CIP605 | CIP610 | CIP620 |
| Bandwidth | 50MHz | 100MHz | 200MHz |
| Rising Time | <7ns | <3.5ns | <1.8ns |
| Isolation Voltage | AC 3000Vrms/1min , Rated for 600V CATIII / 1000V CATII | ||
| Input Dynamic Range | 1.0mV – 1.5kV | ||
| Gain/Attenuation | x5*，x1* ，1/2，1/10，1/20，1/100，1/200，1/1000 | ||
| Output Voltage | 0～±1.5V | ||
| Input Impedance | 10MΩ/9pF （for 10x probe） | ||
| Output Impedance | 50Ω | ||
| Other Functions | AC/DC Switch，Over Range Alarm，Battery Low/Charge Indicator | ||
| Input Leads Length | 1500mm | ||
| Output Cable Length | 300mm | ||
| Size of the Isolation Amp | 130mmx46mmx28mm | ||
| Weight of the Isolation Amp | 90g（without battery） ，180g（with battery） | ||
| Power Supply for Operation | DC 5V–9V，500mA | ||
| Power Supply for Charge | DC 9V , 800mA | ||
| Battery | 7.4V/2200Mah Lithium battery | ||
* Using 1x probe
本页面为【 杭州祺来 】厂家所生产的【CIP620隔离探头】的详细资料/价格/技术规格/报价等介绍，我公司为【 杭州祺来 】的【CIP620隔离探头】北京代理经销商，常年备有CIP620隔离探头大量现货，如需咨询CIP620隔离探头价格/参数等信息，请致电：010-569109517/18
