福禄克Fluke 700 PTP手持式压力泵 福禄克Fluke 700 PTP手持式压力泵

福禄克Fluke 700 PTP手持式压力泵与Fluke 700系列压力模块和Fluke 710系列压力校准器一同使用。
描述：Fluke 700 PTP是手持式压力泵，压力范围为-83KPa～4080KPa（-11.6psi～600psi）, 700PTP有两个压力接口：
3/8-BSP（ISO228）内螺纹，用于与压力模块或压力测量单元连接。
1/8-BSP（ISO228）内螺纹用于与被测单元连接。
应用：Fluke 700 PTP有一体化压力调整旋钮，旋转11圈密封腔容积改变2.0cc。压力的变化还取决于额定压力和整个密封腔的容积，在Z小压力腔和Z大压力情况下旋转旋钮时，压力调整范围为360±20Psi。在Z小压力腔且无压力作用下，旋钮仍可提供0～70″H2O压力调整范围。较大的压力腔下，调整范围变小，但相应的分辨率会增大，也可以通过压杆行程的长度限制Z大输出压力。Z大输出压力可从25 Psi到360 Psi。
附机包括：
1、连接压力泵参考压力口与Fluke 700 Pxx压力模块（P29, P30, P31除外）的1/4NPT外螺纹接口的适配器。
2、一米长的尼龙带。用于连接压力泵被测单元接口与被测仪器。尼龙管两瑞为1/4BSP（ISO228）内螺纹接口。
3、1/4BSP内螺纹到1/4NPT内螺纹的转换头。
4、密封圈备件一套。
5、说明书。
材料：镀镍黄铜/镀铅
尺寸：220mm×105mm×63mm
重量：0.65Kg
保修期：1年

700PTP Pneumatic Test Pump

The Fluke 700PTP is a handheld pressure pump designed to generate either vacuum to -11.6 psi/-0.8 bar or pressure to 600 psi/40 bar.

700PTP Pneumatic Test Pump

The Fluke 700PTP has two pressure ports:

• 3/8-BSP （ISO228） female parallel thread fitting for the reference gauge or pressure module
• 1/8-BSP （ISO228） female parallel thread fitting for the unit under test

The Fluke 700PTP features an integral pressure adjustment vernier which varies the pressurized volume by 2.0 cc over approximay eleven turns of the vernier knob. The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume, but with a minimum volume and maximum pressure, the vernier provided 360 ¤20 psi adjustment range. With a minimum volume and no pressure applied, the vernier can also be used to provide a 0 to 70" H₂O range. Larger volumes will provide a smaller range of adjustment, but greater resolution. The length of the stroke can be adjusted to limit the maximum output pressure. Maximum output pressure is adjustable from 2.5 psi to 600 psi.
Included:

• Adapter to connect the reference gauge port on the pump body to the 1/4 NPT male fitting on Fluke 700Pxx Pressure Modules （except 700P29, P30, and P31）
• One-meter nylon hose to attach to unit under test port to the unit under test. The hose terminates in a 1/4-BSP （ISO228） female parallel thread fitting
• Adapter to convert the 1/4-BSP female parallel thread fitting to a 1/4 NPT female
• Replacement seal kit
• Instruction sheet

700PTP Pneumatic Test Pump