ms8910 ms8910华谊华仪自动识别片状电阻电容通断
- 型号：ms8910
- 产地：广东 深圳市
- 供应商：深圳市九九仪器仪表有限公司
- 供应商报价： 150.00￥
- 标签：ms8910华谊华仪自动识别片状电阻电容通断,ms8910华谊华仪自动识别片状电阻电容通断价格,ms8910华谊华仪自动识别片状电阻电容通断厂家
产品库
这是很灵巧的手持式测试片状元器件(SMD)，
例如，片状电阻，片状电容，片状二极管的
测试表。还有测试通断的功能。
本仪表完全自动地判别电阻，电容，二极管以及通断测试。
技术规格
功能 | 量 程 | 分辨率 | 精度 |
电 阻 | 300Ω/3KΩ/30K/300K/ 3MΩ 30MΩ | 0.1Ω | ±(1%rdg+ 2dgt) “ “ “ ±(1.2rd%+3dgt) |
电 容 | 3nF/30nF/ 300nF/ 3uF/30uF/ 300uF/3mF/ 30mF | 1pF | ±(2.5%rdg+ 3dgt) “ “ ±(3%rdg+ 3dgt) |
二极管 | 开路电压: 2.8V 测试电流t : 2mA | ||
通断 | 电阻值小于30Ω, 蜂鸣器就响。 | ||
附件: 备份测试针：2个
测试
扫描模式
一安装3V锂电池，仪表就接通电源，进入
自动扫描测试模式。这时在显示器上显示
‘SCAN’符号和‘- - - -’符号。
仪表自动判别电阻，电容，二极管以及通断模式。测试数据立即显示在液
晶显示器上。
注意
要在印刷电路板上测试片状元器件时，必须在断电的情况下进行测试，
并要放电电容器的电压。
.
电阻测量
[1] 自动扫描方式下:
测量范围：
300.0Ω— 3.000MΩ
[2]用‘FUNC“按键选择电阻测量模式时:
量程扩展到30 MΩ,
即，.300.0Ω— 30.00MΩ
当过载时，‘OL’符号显示在液晶显示器上。
.电容测量
[1]自动扫描方式:
量程：3.000nF — 300.0uF。
[2]用‘FUNC’按键进入电容测试模式时，
量程扩展到30.00mF,
即，3.000nF—30.00mF.
注意
二极管测试
可选择自动扫描方式和用‘FUNC’按键选择测试模式的方式。
维护
电池更换
注意:
锂电池规格: 3V CR2032
MS8910 SMART SMD测试仪
深圳华仪MS8910 测试仪、测试笔
特点：
自动扫描测试电阻，电容，的连续性和DiodeAuto电源OffLow电池指示灯
华仪MS8910 SMD测试仪/MASTECH MS8910 SMD测试笔（外贸产品）
Descriptions:
- The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting)
Device), there are Chip type resistor, Chip type capacitor and diode, for example. Moreover, the Tester have the continuity checking function
- The Tester is automatically identified the passive Component as has been indicated above. Therefore, the measurement are allowed by fully automatic detection. The Tester is designed to meet IEC1010-1 standard and Stipulation of 2-Poulation Grade. The Tester conform to the European unio’s following Requirement: CE regulation 89/336 (EMC Electromagnetic Compatibility）。
- The entire outer surface of the Tester case has been with thermo plastic elastomer, and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty.
- This operating instruction covers information on safety and caution, so please read relevant information carefully and observe all the warming and note strictly.
Features:
- 3000 counts LCD display
- Full automatic measurement
- Auto scanning the Resistance/Capacitance/Diode
- Function selection by one “FUNC” Push Button
- Data Hold function
- Continuity Checking function
- Over Load Indication ( ‘OL’)
- Low Battery Indication
- Power Supply: 3V Lithium Battery CR2032 (included)
- Auto Power OFF. If the Tester is idle for more than 10 minutes, the tester will automatically turn off the power .
- Operating temperature & Humidity: 0 ~ 40℃(32 ~104 ℉) & < 80% RH
- Storage temperature & Humidity: -10 ~ 50℃ (14 ~ 122 ℉) & <70%RH
- Safety Class: IEC61010-1, 50V CAT III
- EMC: According to CE regulation 89/336.
- Dimension (L x W x H) & Weight: 170 x 31 x 17mm, Approx. 48.6 g
Package including:
1) 1MS8910 SMD RC Resistance Capacitance Meter
2) 1 unit of CR2032 Battery;
3) English manual;
4) Plastic carrying case
Resistance | ||
Range (Ω) | Resolution (Ω) | Accuracy |
300 | 0.1 | ±(1.0% of rdg + 2 digits) |
3K | 1 | |
30K | 10 | |
300K | 100 | |
3M | 1K | |
30M | 10K | ±(1.2% of rdg + 3 digits) |
Capacitance | ||
Range (F) | Resolution (F) | Accuracy |
3n | 1p | ±(2.5% of rdg + 3 digits) |
30n | 10p | |
300n | 100p | |
3µ | 1n | |
30µ | 10n | |
300µ | 100n | ±(3.0% of rdg + 3 digits) |
3m | 1µ | |
30m | 10µ | |
Continuity | The buzzer will sound if the resistance is less than 30 ohms | |
Diode Check | Testing current: 2mA | Open Circuit voltage: 2.8 V |
