- VICKERS压力控制阀/伊顿威格士压力控制阀

VICKERS压力控制阀/伊顿威格士压力控制阀

注意，改变此设定值将影响阀与阀之间的互换性

Z低压力调整50% 该型Z高压力限制

指令信号范围，KACG 型0 至 +10V DC, 或 0 至–10V DC

于 KCG 阀(仅带“H”型线圈)的放大器:

EHH-AMP-724-C/D-10 (Uniplug)

EHH-AMP-7*2 系列 (电源插头)

DG4S * type valve is electrically controlled two or four direction control

valve. Their main function in the hydraulic circuit is to put the oil

Liquid to the cylinder or to control the direction of rotation of the hydraulic motor.

没有限制，使阀保持全流量通过油口 T。

EHD DSG 201 A 1* 指令信号发生器

EHA RMP 201 A 2* 斜坡发生器

EHA PID 201 A 2* PID 控制器

EHA PSU 201 A 1* 电源

ISO 4400 (DIN 43650) 电气插头:



VICKERS压力控制阀/伊顿威格士压力控制阀

颤振，KACG 型工厂设定，用户不可调

KBCG-3, 1* 比例溢流阀带内置放大器

KCG-3, 1* Series; KACG-3, 1* 系列

比例压力溢流阀 KCG-3, 1* 系列

比例溢流阀 EHST-3-30 系列 & EHST-3-40 系列 (CE 认证)

监测器点信号，KACG 型0,5V/安培电磁铁电流

功率级 PWM，KACG 型2kHz 标称值

电磁铁相容性 (EMC)大 10V 指令信号。

用户调整 - 30% 至 120% 的工厂设定值。

The following response times are defined as power on / off to incoming

The time between the change in the pressure of the mouth.

Unless the solenoid is continuously energized, otherwise the spring is centered

And the spring biased valve will be reset under spring action.

No spring, with positioning valve can be instantaneous power, about 0.15

second. When the electromagnet power off, as long as there is no

Impact, vibration or abnormal pressure transients, spool will be

Keep in the last arrived position.

EEA-PAM-513-A-14 (1 个可调斜坡)

EEA-PAM-513-A-3* (2 个可调斜坡)

于 KACG 型阀的辅助电子模块

DIN-轨条安装):

EHA CON 201 A 2* 信号转换器



VICKERS压力控制阀/伊顿威格士压力控制阀