4通道电源测试系统

  

^适用：适用于充电器，电源适配器，移动电源,LED驱动电源的在线测试！

 ATC1500-QRX适用于电源厂生产线测试使用。

机柜型测试，测试速度快，同时可迅速形成测试报表，有效的提高了工厂的品质控制能力。

 特点: 1.测试速度快,精度高!

2.充电器、适配器、移动电源测试.

3.待机功率可Z小测至3mW左右.

4.性价比高.

5.自动生成Excel(内含生产数量,不良率,柏拉图,CPK值.)

6.可测试平均效率,I-V曲线.

7.具有LED负载模式,可测试LED驱动电源

二、配置清单：

	配件明细				ATC150主机X4		内含4路电子负载(0-60V/0-1/150w)/4路功率计/4路示波器模块		品Pai:STS
				四通道测试架X1		左右智能转换		品Pai:STS
				工业电脑X1		研为工控		品Pai:研为
				显示器X1		BENQ		品Pai:明基
				ID电压测试盒		4路ID电压		品Pai:STS
				配套线材X1		配套连接一		品Pai:STS
				AC变频电源		0-300V/1000VA		品Pai：STS
				软件X1		STS自主研发		品Pai:STS
				机柜X1		19"标准机柜1.7米高.		品Pai:怡丰

. 因为STS的仪器为高度集成式设计,所有模块均集成在一个主机内,该主机即为ATC150.该主机内置了以上1-5项的模块.以上产品除工业电脑外,其它所有模块均由STS自行生产. STS的产品为 美国设计,ZG制造.

售后服务: 所有产品自销售之日起一年内免费维修,终身维护.

三、主要功能特点：

                    

1.可以测试充电器,适配器,移动电源,LED驱动电源等.四通道同时测试，提高生产效率。为客户节约2－3名人工。

2.图形界面基于Windows XP环境

3.测试程序编辑存储功能

4.测试项目选择功能（输入/输出/空载/短路

欠压/稳压/过载/纹波/效率等功能）

5.统计测试报告（Excel电子档）

6.自动生成CPK等品质报表

7.配置灵活

8.性价比高，适合大中小企业。

9.测试速度快

10.测试不良结果实时打印功能(需外接打印机)

  四、测试项目

	Test Name		Parameter and Range		Accuracy
	START UP启动		Inrush current: 0 – 83Apk	Startup time: 0 to 32767msec.	Output voltage overshoot: 0 – 60Vpk	Rise time :0-32767msec		±1% (reading + range)	±1ms	±1% (reading + range)	±1ms
	UVLO欠压		Functional test only, Pass/Fail		N/A
	IDLE待机		Standby input power: 0 – 5/25/250/1250W	Standby input current: 0 – 0.1/0.5/5/25Apk	Input voltage: 30 – 280V*Note 2		±0.1% (reading + range)	±0.1% (reading + range)	±0.1% (reading + range)
	STANDARD CV	(Constant Current and Constant Resistance load) 恒压		CC Mode: 0 – 3/15 A	CR Mode: 0.1 – 50Ohm	Input Voltage: 30 – 300Vrms *Note 1	Input Current: 0 – 0.1/0.5/5/25Apk	Input Power: 0 – 5/25/250/1250W	Power Factor 0 – 1.0	Output Voltage 0 – 15/60Vdc	Output Current 0 – 3/1dc	Efficiency: 0 –	Ripple/Noise 200kHz: 0 – 500mV	Ripple/Noise 20MHz: 0 – 500mV	ID Voltage:0-60v		±0.15% (setting + range)	±0.3% (setting + range) *Note 2	±0.1% (reading + range)	±0.1% (reading + range)	±0.1% (reading + range)	±0.2% (reading + range)	±0.05% (reading + range)	±0.1% (reading + range)	±0.25% (reading + range)	±2% (reading + 5mV)	±2% (reading + 5mV)	±0.1% (reading + range)
	STANDARD CC	(Constant Voltage and Constant Resistance load)恒流		CV Mode: 0 – 15/60V	CR Mode: 0.1 – 50Ohm	Input voltage: 30 – 300Vrms *Note 1	Input Current: 0 – 0.1/0.5/5/25Apk	Input Power: 0 – 5/25/250/1250W	Power Factor 0 – 1.0	Output Voltage 0 – 15/60Vdc	Output Current 0 – 1dc	Efficiency: 0 –		±0.15% (setting + range)	±0.3% (setting + range) *Note 3	±0.1% (reading + range)	±0.1% (reading + range)	±0.1% (reading + range)	±0.2% (reading + range)	±0.05% (reading + range)	±0.1% (reading + range)	±0.25% (reading + range)
	LED Driver Test (LED Load)	LED负载			Input voltage: 30 – 300 Vrms *Note 1	Input Current: 0 – 5/2pk	Input Power: 0 – 250/1250W	Power Factor 0 – 1.0	Output Average Current reading: 0 – 1dc	Output Average Voltage reading: 0 – 60Vdc	Output pulsed current reading (TRIAC, PWM)		±0.1% (reading + range)	±0.1% (reading + range)	±0.1% (reading + range)	±0.2% (reading + range)	±0.1% (reading + range) *Note 4	±0.05% (reading + range) *Note 4	±0.5% (reading + range)
	SHORT CIRCUIT	短路			Input voltage: 30 – 300 Vrms *Note 1	Input Current: 0 – 5/2pk	Input Power: 0 – 250/1250W	Power Factor 0 – 1.0	Output Average Current: 0 – 1dc		±0.1% (reading + range)	±0.1% (reading + range)	±0.1% (reading + range)	±0.2% (reading + range)	±0.2% (reading + range) *Note 4
	OVER CURRENT	过流		Current trip point: 0 – 3/1dc	Trip point voltage: 0 – 15/60Vdc	Wait Time >= 10msec.	Wait Time < 10msec.	Voltage Before Trip Point: 0 – 15/60Vdc	Current Before Trip Point: 0 – 3/1dc		±0.1% (reading + range)		±0.05% (reading + range)	±0.1% (reading + range)	±0.1% (reading + range)	±0.1% (reading + range)
	OVER VOLTAGE过压		OV trip point: 0 – 60V		±0.1% (reading + range)
	LINE REGULATION	线性调整		Voltage regulation: 0 –		±0.1% (reading + range)
	LOAD REGULATION负载调整		Voltage regulation: 0 –		±0.1% (reading + range)
	AVERAGE EFFICIENCY 平均效率		Efficiency: 0 –		±0.25% (reading + range)
	I-V CURVE PLOT I-V曲线		CC Mode: 0 – 3/15 A	CC Mode Output Voltage 0 – 15/60Vdc	CC Mode Output Current 0 – 3/1dc	CV Mode: 0 – 15/60V	CV Mode Output Voltage 0 – 15/60Vdc	CV Mode Output Current 0 – 1dc		±0.15% (setting + range)	±0.05% (reading + range)	±0.1% (reading + range)	±0.15% (setting + range)	±0.05% (reading + range)	±0.1% (reading + range)
	POWER DOWN关机		Holdup time: 0 – 65535 msec.	Input voltage: 30 – 300Vrms *Note 1	Output Current 0 – 3/1dc	Output voltage overshoot: 0 – 60Vpk		±1ms	±0.1% (reading + range)	±0.1% (reading + range)	±1% (reading + range)
	Global Setting总体设定		Load On Voltage: 0 – 60Vdc	Wait Time: 0 – 32767msec.	Nominal Output Voltage: 0 – 60Vdc	Nominal Output Current: 0 – 1dc		±1% (reading + range)	±1ms	±1% (reading + range)	±1% (reading + range)
	Optional Setting可选项设定		Bias Output Voltage : 0 – 28Vdc	Relay State rated current: 3A		±0.2% (reading + range)	-