AKT4112100 现货销售松下温控器AKT4112100

是否提供加工定制	是	品Pai	松下
型号	AKT4112100	控制类型	温度
控制模式	智能温度控制调节器	测量对象	见说明书
温度范围	0-1000（℃）	测温误差	0.5（℃）
开孔尺寸	48*48*96（mm）	安装型式	见说明书
输出信号	见说明书（mA）	工作电压	220（V）
外形尺寸	48*48*96（mm）	重量	见说明书（Kg）

松下温控器型号:AKT4112100KT4 SeriesBase modelPower supplySensor inputControl outputAlarm outputHeating/ cooling controlHeater burnout alarmCommunications functionDescription

AKT4								48×48×95mm
	1							100 to 240V AC
	2							24V AC/DC
		1						Multi-input (Thermocouple, RTD, DC Voltage and DC Current)
			1					Relay contact output 1a 3A 250V AC
			2					Non-contact voltage output (for SSR drive)
			3					Current output
				1				Relay contact output 1a (Alarm output 1)
				2				Relay contact output 1a (Alarm output 2)
					0			Not available
					4			SSR output 0.3A 250V AC (Heating/Cooling control not supported when 2 alarm output points are selected)
						0		Not available
						1		(Heater burn-out alarm not supported when control output is current output type/not supported when heating and cooling control is selected)
						2		10A (Heater burn-out alarm not supported when control output is current output type/not supported when heating and cooling control is selected)
						3		20A (Heater burn-out alarm not supported when control output is current output type/not supported when heating and cooling control is selected)
						4		50A (Heater burn-out alarm not supported when control output is current output type/not supported when heating and cooling control is selected)
								Not available
							1	Available

**

CT1 or CT2 for current detection is provided as an accessory when heater burn-out alarm function is added.

Event output will be shared if you choose alarm output 2 and the heater burnout alarm.

Part No.(Ex) Part No. when the optional functions (of Heating/Cooling control: SSR output + Communications function) is added on to the basic model are as follows;Part No.: AKT41111401OptionsProduct namePart No.Shunt resistor (for Current input)Terminal cover

AKT4810

AKT4801

Note:

When Current input is specified, a shunt resistor (sold separately) is required.

Rating And SpecificationsDisplaySpecificationsKT2KT4KT8KT9KT7SizeRatingSupply voltage (Must be specified)FrequencyPower consumptionRated scaleInput typeThermocoupleKJRSBETNPL-IIC(W/Re5-26)RTDPt100JPt100DC Current4 to 20mA DC0 to 20mA DCDC Voltage0 to 1V DC0 to 10V DC1 to 5V DC0 to 5V DCMulti-inputThermocoupleRTDDC currentDC voltageControl output(Must be specified)Relay contact(contact material:sliver alloy)Non-contact DC voltageDC currentAlarm output 1Alarm output 2Control modeTarget temperature settingProgram control functionAccuracyThermocoupleRTDDC current and DC voltageSampling periodHysteresisProportional bandIntegral timeDerivative timeProportional cycleAllowable voltage fluctuationInsulated resistanceBreakdown voltageMalfunction vibrationBreakdown vibrationMalfunction shockBreakdown shockAmbient temperatureAmbient humidityMassWaterproofDisplay character heightOptionsHeating/Cooling control(Relay contact material:silver alloy)Heater burn-out alarm output(Relay contact material:silver alloy)Communication functionAccessoriesMounting frameTerminal cover

48×24mm	48×48mm	48×96mm	96×96mm	22.5×75mm
100 to 240V AC
24V AC/DC
50/60Hz
Approx. 5VA	Approx. 8VA	Approx. 8VA	Approx. 8VA	Approx. 6VA
Input range
-200 to 1370°C(-320 to 2500 ° F)
-199.9 to 400.0°C(-199.9 to 750.0 ° F)
-200 to 1000°C(-320 to 1800 ° F)
0 to 1760°C(0 to 3200 ° F)
0 to 1760°C(0 to 3200 ° F)
0 to 1820°C(0 to 3300 ° F)
-200 to 800°C(-320 to 1500 ° F)
-199.9 to 400.0°C(-199.9 to 750.0 ° F)
-200 to 1300°C(-320 to 2300 ° F)
0 to 1390°C(0 to 2500 ° F)
0 to 2315°C(0 to 4200 ° F)
-200 to 850°C(-300 to 1500 ° F)
-199.9 to 850.0°C(199.9 to 999.9 ° F)
-200 to 500°C(-300 to 900 ° F)
-199.9 to 500.0°C(-199.9 to 900.0 ° F)
-1999 to 9999, -199.9 to 999.9 -19.99 to 99.99, -1.999 to 9.999
· Scaling and change to the decimal point position is possible for DC current and DC voltage input. · DC current input is supported with an externally mounted 50Ω shunt resistor (sold separately).
K, J, R, S, B, E, T, N, PL-II, C (W/Re5-26) External resistor: Max. 100Ω (max. 40Ω external resistor for B input)
PT100, JPt100 3-conductor system (Allowable input conductor resistance for each conductor: max. 10Ω)
0 to 20 mA DC, 4 to 20 mA DC Input impedance: 50Ω (Connect 50Ω shunt resistor between input terminals.) Allowable input current: max. 50 mA (when 50Ω shunt resistor is used)
· 0 to 1V DC Input impedance: min. 1 MΩ, Allowable input voltage: max 5 V, Allowable signal source resistance: max. 2 kΩ · 0 to 5 V DC, 1 to 5 V DC, 0 to 10 V DC Input impedance: min. 100 kΩ, Allowable input voltage: max 15 V, Allowable signal source resistance: max. 100Ω
1a	1a	1a1b		1a
1a 3A 250V AC (Resistive load),1a 1A 250V AC (Inductive load cosØ=0.4), Electric life: 100,000 times
12+20 V DC, Max. load current: 40mA (Short-circuit protected)
4 to 20mADC Load resistance: Max. 550Ω
Relay contact 1a 3A 250V AC (Resistiveload), 1a 1A 250V AC (Inductive load cos φ=0.4)	Relay contact 1a 3A 250VAC (Resistive load) Electric life: 100,000 times			Open collector, Control capacity: 24V DC 0.1A(Max.)
Open collector 0.1A 24V DC	The same as the one of Alarm output 1			None
Actions mentioned below can be selected by key operation. [Default PID] PID (with auto-tuning function), PI, PD (with manual reset function), P (with manual reset function), ON/OFF action
Primary setting/secondary setting (switched by external terminal)	-	Primary setting/secondary setting (switched by external terminal)		-
1 pattern, 9 step setting is possible (However,make function selection setting of either control with fixed set point or program control.)	-
Within ±0.2% ±1 digit of each input span or within ±2°C (4°F) whichever is greater However, R and S input; Within ±6°C (12°F) in the range of 0 to 200°C (0 to 400°F) B input 0 to 300°C (0 to 600°F): Accuracy is not guaranteed. K, J, E, and N input less than 0°C (32°F): Within ±0.4% ±1 digit of input span
Within ±0.1% ±1 digit of each input span or ±1°C (2°F) whichever is greater
Within ±0.2% ±1 digit of each input span
250ms
Thermocouple and RTD: 0.1 to 100.0°C (°F) DC current and DC voltage: 1 to 1000 (The decimal point place follows the selection)
For sensor input range and DC current,DC voltage 0.0 to 110.0%	Thermocouple: 0 to 1000°C (0 to 2000 ° F) RTD: 0.0 to 999.9°C (0.0 to 999.9 ° F) DC current and DC voltage: 0.0 to 100.0%			For sensor input range and DC current, DC voltage 0.0 to 110.0%
0 to 1000 seconds
0 to 300 seconds
1 to 120 seconds
When 100 to 240V AC; 85 to 264V AC When 24V AC/DC; 20 to 28V AC/DC
500V DC 10MΩ or greater
1.5kV AC for 1 min between input terminal and power terminal, and between output terminal and power terminal	1.5kV AC for 1min between input terminal and ground terminal, between input terminal and power terminal between power terminal and ground terminal between output terminal and ground terminal, and between output terminal and power terminal			1.5KV AC for 1 min between input terminal and power terminal, and between output terminal and power terminal
10 to 55Hz (0.35mm) to each direction (120ms sweep) for 10min.
10 to 55Hz (0.75mm) to each direction (120ms sweep) for 10min.
X, Y and Z each direction for 5 times 10G
Same as above, but 30G
0 to 50°C
35 to 85%RH (No condensation)
Approx. 120g	Approx. 130g	Approx. 240g	Approx. 370g	Approx. 150g
IP66 (applicable only to the front panel subject to rubber gasket employed)				None
PV: 8.7mm, SV: 8.7mm (PV/SV switching display)	PV:10.2mm SV:8.8mm	PV:11.2mm SV:11.2mm	PV:18mm SV:13.2mm	PV:7.4mm SV:7.4mm
Relay contact: 1a 3A 250V DC (Resistive load)	Non contact relay 0.3A 250V AC (Resistive load)	Relay contact: 1a 250V AC 3A (Resistive load), 250V AC 3A (Inductive load cosφ=0.4), Electric life: 100,000 times Non-contact voltage: 12 V DC Max. 40mA (Short-circuit protected) DC current: 4 to 20mA DC Load resistance: Max. 550Ω		None
-	Heater rated current must be selected from , 10A, 20A and 50A. Setting accuracy: Within 5% of heater rated current Relay contact 1a 250V AC 3A (Resistive load), Electric life: 100,000 times			Open collector, Control capacity: 24V DC 0.1A(Max.)
RS-485/Modbus Protocol (Modbus is a communication protocol developed for PLCs by Modicon Inc.) Communication speed: 2400/4800/9600/19200bps
Included with unit				Not available
Sold separatel				Not available

价格合理，原装，假一赔百如有不详，欢迎联系垂询！(更详细规格及资料请与我司联系,并可索取PDF电子版本资料)注：1、由于价格浮动，终价格请与我公司联系后再行商议。2、其它型号产品欢迎联系查询价格货期。★购前必读：★发货，到货及邮资：根据城市的远近，邮资差距很多，请买家在购买之前与本公司咨询邮费由于快递公司发货偶尔也有延误情况，希望买家如遇此事能够多谅解谢谢！特别申明：我们不欢迎对到达时间过于苛求的买家，本公司保证尽快发货！无法保证精确的时间到货，因为快递公司和邮局是我公司无法安排的，送货员（快递公司的送货员服务素质良莠不齐），天气（大雾大雪天气造成的高速封路）和交通（交通管制、飞机误点和汽车堵塞）等，这些都超出了您我的控制范围。请大家互相谅解！谢谢！发货说明：本公司在无特殊原因情况下坚持当天发货，但有时难免遇到‘缺货’‘时间来不及’等原因造成延误的话还敬请谅解！我们会及时联系您的。到货提示：1，到货时快递一般会联系您的，我们的商品及包装在没有受到重摔，重压的情况下是不会损坏的，签收前请尽量当快递员面拆开检查一下，如发现问题请不要签收。2，如果遇到快递员态度不好或者不给您送到家叫您下楼来拿，还请您原谅理解不要计较。3，快递公司属于第三方您我都无法控制其到货时间的准确性还请多理解！4，由于大多数快递公司周六，和周日派件不怎么正常，加上客户有的是留上班公司的地址而客户双休日休息，所以我们周六的件有可能到周日一起发出。◆为让大家购物成功，请大家购买前注意商品功能确认，未经确认，出现不符情况概不负责,每款商品都有自己的优点和不足,选择商品时请对购买的商品作足够的了解,建议见过实物及网络相关评测参考后,视实际需要再决定购买!如出现争论概不负责，敬请理解!◆本公司是代理经销商品非生产商.对商品的特殊参数无法掌握.如有特殊要求的请说明！◆你的‘肯定’应该包括售后保质服务.如果你购买的商品出现问题请一定联系我们.我们一起确定问题的原因.以便于我们更新和改进.我们会以《顾客一的宗旨》及时解决！◆本公司不接受‘砍价’微薄的利润是我们生存，及商品售后保质的基本保障！◆签收包裹时，请当着投递员（派送件人员）的面，拆箱检查货物的规格和数量，如果有疑问，请一时间联系我们。以免产生不必要的麻烦，谢谢合作！★保修需知：◆质量标准：本公司所供产品均为全新原装产品，绝无二手及翻新产品，否则假一赔十并全款退货，但买方由于购买型号错误我方概不负责退换货，另本公司销售的产品自发货之日起享受一年的质量保证，按原厂质量标准，在保质期间内有产品问题，需由生产厂家检验确认后，供方给予解决，需方因保管、使用、保养不善等造成产品质量下降的，不得提出异议；◆如有异议，请勿购买！期待与您的合作，希望与您共同发展进步，请多多指教和联系……后祝你购物愉快！