NO NC 恒温器,温控开关,温控器,恒温开关,温度开关,

品Pai	ELECTROL	型号	NO NC
控制模式	机械式温度控制器	温度范围	0-60（℃）
精度等级	1	测温误差	1（℃）
开孔尺寸	30（mm）	安装型式	道轨试
输出信号	30（mA）	工作电压	230（V）
外形尺寸	60X33X43（mm）	控制类型	温度

技术参数电子恒温器是用来调节120-250VAC 的设备,开关可以转换加热或制冷接触器.技术数据开关温度公差 大约3K连接类型 恒温双金属接点类型转换接触接触电阻< 10m0hm产品使用期限>100 000次开关容量250VAC,10(2)A120VAC,15(2)ADC 30WEMCacc,to EN 55014-1-2,EN 61000-3-2,EN 61000-3-3连接2接点线径2.5mm.螺丝扭力0.8Nm固定方式截面为35mmDIN路轨，EN50022（或为出口过滤EF118系列）外壳材质塑料根据UL94 V-0，浅灰色尺寸60X33X43mm重量大约。40g贴合位置简易操作/保持温度-45到+80。C(-49到+176。F)防护等级IP20Large setting rangeSmall sizeSimple to mountHigh switching performanceKTO 011: Thermostat (normally closed); contact breaker for regulating heaters.KTS 011: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.

Switch temperature difference	7K (± 4K tolerance)
Sensor element	thermostatic bimetal
Contact type	snap-action contact
Service life	> 100,000 cycles
Max. Switching capacity	250VAC, 10 (2) A
	120VAC, 15 (2) A
	DC 30W
Connection	2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² stranded wire (with wire end ferrule) 1.5mm²
Mounting	clip for 35mm DIN rail, EN60715 (or for exit filter EF 118 Series)
Casing	plastic according to UL94 V-0, light grey
Dimensions	60 x 33 x 43mm
Weight	approx. 40g
Fitting position	variable
Operating / Storage temperature	-45 to +80°C (-49 to +176°F)
Protection type	IP20

Prerequisite for a clean operation of your components is the right climate in your enclosure. The right climate can be attained by a temperature and moisture control system which is put in place. Thermostats and Hygrostats are used for the control of heaters, filter fans, heat exchangers and air conditioning equipment. They activate when set temperature or humidity values are exceeded or have fallen below.