Hawke防爆格兰（Hawke ICG 653/Universal Cable Gland）

UL认证Hawke防爆格兰（Hawke ICG 653/Universal Cable Gland）
Hawke防爆格兰（Hawke ICG 653/Universal Cable Gland）
上海颐品自动化，：
上海颐品自动化，：

Hawke ICG 653/Universal Cable GlandFlameproof Exd / Increased Safety Exe / Dust Extb / Dual Certified ATEX - IECExApplication

Outdoor or indoor use. Group II Hazardous Area
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with:-
a) Cable inner sheaths that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit ‘cold flow’ characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area.

Ordering Format [ Gland Type / Size / Thread / Material / Options ]

Example without options: ICG 653/UNIV / C / M32 / Brass

Example with alternative clamping ring option: ICG 653/UNIV / C / 1¼" NPT / Brass / AR

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, using one clamping arrangement for all armour/braid types.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

Materials & Finishes

The ICG 653/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.

Technical Data

1. Exd IIC Gb, Exe II Gb, Extb IIIC Db
2. Certificate No's
   Baseefa06ATEX0058X and IECEx BAS 06.0015X.
3. Suitable for use in:
   Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.
4. Construction and Test Standards:
   IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31.
5. Ingress Protection:
   IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
6. Deluge Protection to:
   DTS01
7. Operating Temperature Range:
   -60°C to +80°C
8. Assembly Instruction Sheet:
   AI 301.

CABLE GLAND SELECTION TABLE
Size Ref.	Entry Thread Size			Cable Acceptance Details								‘G’ Compressed Length	Hexagon Dimensions
				Inner Sheath/ Cores				‘B’ Outer Sheath		‘C’ Armour/Braid
	Metric	NPT *		‘D’ Max. Over Cores	‘E’ Max. Inner Sheath	NOTE 1 Max. No. Of Cores	NOTE 2 Max. No. Of Cores						Across Flats	Across Corners
		Standard	Option					Min.	Max.	Orientation 1	Orientation 2
Os	M20	½"	-	8.9	10.0	12	6	5.5	12.0	0.8 / 1.25	0 / 0.8	67.0	24.0	26.5
O	M20	½"	-	8.9	10.0	12	6	9.5	16.0	0.8 / 1.25	0 / 0.8	67.0	24.0	26.5
A	M20	¾"	½"	11.0	12.5	15	10	12.5	20.5	0.8 / 1.25	0 / 0.8	67.0	30.0	32.5
B	M25	1"	¾"	16.2	18.4	30	21	16.9	26.0	1.25 / 1.6	0 / 0.7	73.6	36.0	39.5
C	M32	1¼"	1"	21.9	24.7	42	42	22.0	33.0	1.6 / 2.0	0 / 0.7	78.0	46.0	50.5
C2	M40	1½"	1¼"	26.3	29.7	60	60	28.0	41.0	1.6 / 2.0	0 / 0.7	82.4	55.0	60.6
D	M50	2"	1½"	37.1	41.7	80	80	36.0	52.6	1.8 / 2.5	0 / 1.0	88.7	65.0	70.8
E	M63	2½"	2"	47.8	53.3	100	100	46.0	65.3	1.8 / 2.5	0 / 1.0	92.7	80.0	88.0
F	M75	3"	2½"	59.0	66.2/65.3 †	120	120	57.0	78.0	1.8 / 2.5	0 / 1.0	99.4	95.0	104.0
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT entry option. Note 1: ATEX/IECEx certification only. Note 2: All other certification.

 

 

 

 

 

ZG区分销商：
上海颐品自动化科技有限公司
Shanghai Epin Automation Co.,Ltd.

Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
全国免费: