六、型号规格： 熔体流动速率测定仪-微机控制 熔体流动速率测定仪-数字显示 熔体流动速率测定仪-蓝屏显示 Description: XNR - 400 - c melt flow rate meter is according to GB/T 3682 test method, is used for mensurating the liquidity of thermoplastic polymer at high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon, fluorine plastic polymer, etc. The xnr-400c melt flow rate meter adopts PLC programmable controller, liquid crystal operation platform, and temperature control adopts individual temperature control unit LED digital display. Melt flow rate meter is controlled by the host and the combined operation of the computer display of dual control, automatic temperature control from methods can be divided into manual, automatic control, when the three types of blanking method, quality standard (MFR) and volume method can be implemented (MVR) two test methods; Melt flow rate meter can measure the melting density of raw material at test temperature, and the system also has temperature calibration function. The system can perform the storage and printing function of test data. The melt flow rate meter is a high-end model in the domestic industry. It is easy to operate, stable in operation and can be tested for a long time, which is well received by users. Test parameters: Measurement range: 0.1-1000.00g/10min (MFR) 0.1-1000 cm3/10min (MVR) Temperature: room temperature - 450 ℃ Temperature control precision: plus or minus 0.01 ℃ Timing precision: 0.01S Displacement accuracy: 0.01mm Negative load: full load Cutting mode: manual, time controlled, automatic Inner diameter: 9.550mm + 0.025mm Cylinder length: 160mm Mouth mold: the material is tungsten carbide and long: 8.000mm + 0.025mm inner diameter: 2.095mm + 0.005mm Power: 0.45KW Power supply: AC220V, 50Hz Instrument size: 350mm x 500mm x 650mm Net weight: 65Kg
Melt flow rate meter Melt flow rate meter Price: RMB 345.0 Origin: chengde Manufacturer: chengde wanji instrument manufacturing co. LTD Technical information: Obtain technical information for free Business integrity: Warranty period: life Quantity: large quantity Supplier: chengde vanji instrument Manufacturing standard: GB/T3682 "determination of mass flow rate and volume flow rate of thermoplastic plastic melt" ISO1133 plastic melt mass flow rate (MFR) and melt volume flow rate (MFR) measurement ASTMD 1238 test method for the determination of thermoplastic flow rate by extrusion plastic meter
Product name: melt flow rate meter - blue screen display Product model: wj-400b Three main purposes and functions: Melt index apparatus conform to the requirements of the standard of GB/T3682-2000, melt index instrument main parameters but also meet the ISO1133, ASTM1238 standards can be used to can be used in polyethylene, polyethylene splendid alkene, polystyrene, ABS, polyamide, fiber resin, acrylic ester, polyformaldehyde, fluorine plastic, polycarbonate and so on the many kinds of plastic material quality of the melt flow rate (MFR) or melt volume flow rate (MVR) to proceed with determination; Adopt the imported double - display intelligent control thermometer, the temperature control precision is stable. The melt indexer is programmed by the microprocessor according to the standard test procedure, the heating rate is fast and the temperature is high. After the packing, the thermostat can be restored quickly. Chinese display, automatic timing, automatic cutting, automatic printing and other functions. (according to user's special requirement). 4 main technical parameters: Temperature control range: room temperature - 450 ℃ Temperature control precision: plus or minus 0.01 ℃ Display resolution: 0.01 ℃ Maximum power: less than 500 W Temperature recovery time: 4 min Piston location detection: (MVR) Upper and lower loop distance: 30 mm Displacement control accuracy: plus or minus 0.1mm Test range: 0.03-450g/10min Standard parts parameters: Cylinder parameters: the inner hole Φ 9.55 + / - 0.025 mm Parameters: the piston is the head Φ = 9.475 + / - 0.015 mm; Piston head length: H = 6.35 + 0.1mm Membrane parameters: the opening mode: material for tungsten carbide, long: 8.000 mm + / - 0.025 mm hole extrusion Φ = 0.025 + / - 0.005 mm Mouth mould configuration: 2.095 + / - 0.005 / Φ Φ 1.18 + / - 0.01 mm Weight parameters: Weight accuracy: plus or minus 0.5% Basic configuration: A 0.325 KG (including pressure rod) B 0.875 KG C 0.960 KG D 1.200 KG E 1.640 KG Note: add weight according to user's requirement Main configuration and accessories:
The number of components is prepared The main machine a A mini printer The range code is a set of 0.325 kg, 0.875 kg, 0.960 kg, 1.200kg and 1.640kg A mouth membrane Φ 2.095 + / - 0.005 mm Feed rod Cleaning rod sleeve Feed funnel one The diameter of the nozzle is one Horizontal bubble one Feed plate Connect cable one set Four of the host feet Attached please Instruction book
Vi. Model specifications: Melt flow rate meter - microcomputer control Melt flow rate meter - digital display Melt flow rate meter - blue screen display
