DCL10 日本三和SANWA万用表--钳形表DCL10
- 型号：DCL10
- 产地：广东 东莞市
- 供应商：东莞市龙业仪器仪表有限公司
- 供应商报价： 540.00￥/台
- 标签：日本三和SANWA万用表--钳形表DCL10,日本三和SANWA万用表--钳形表DCL10价格,日本三和SANWA万用表--钳形表DCL10厂家
产品库
| 品Pai | 日本三和SA | 型号 | DCL10 |
| 测量电压范围 | 齐全（V） | 测量电流范围 | 齐全（A） |
| 测量电阻范围 | 齐全（Ω） |
| DCL10交流电流钳表参数和特点: |
0.01-60-100A交流量程 带背光的ACA专用微型钳 便于狭窄处使用的钳型细磁芯 夹紧状态确认标记 数据锁定 自动关机(大约30分钟) 采样率: 数值 2次/秒 Designed as a small, easy-to-carry device that can be put in your pocket ! Slim jaws with width of approximately 9 mm are used to enable the user to easily clamp the conductive wire under measurement among densely routed conductive wires. ■ Back light has been adopted to use in the dark place. ■ A lever and buttons are laid out in positions where they can be handled with a single hand. ■ The use of a large data hold button with a good click feel enables the user to press the button even in an overhead or other location where the button is not viewable during measurement and to check the measured value later. ■ The use of a portrait type LCD with a backlight provided in the lower part allows the user to read the displayed value while holding the meter. ■ Its rear has been curved so that the clamp meter can be held comfortably in the palm. |
