| 品Pai | 中恒 | 型号 | WYE |
| 控制类型 | 温度 | 控制模式 | 机械式温度控制器 |
| 温度范围 | -35——+320（℃） | 测温误差 | 05（℃） |
| 工作电压 | 250（V） | | |
产品整理：
型号：WYE系列
产品名称:温控器、调温器thermolator
产品关键词:温控器，温度控制开关，机械式温度控制器，液体膨胀式温度控制器
Thermostat, Thermostat switch,mechanical temperature controller,
Liquid expansion temperature controller
行业及产品类目: Home appliance-Home appliacce parts
产品简要描述及优势:
1、电气性能：16A-250V/AC
2、断开温度：根据用户的要求，温度设计范围(-35℃～+320℃)
3、产品寿命：>10万次
4、主体Z高耐温：150℃
Specification
1.Electrical performance:16A-250V/AC
2.Temperature range: -35℃～+320℃
3.Diff: according to the customer requirement.
4. Life: >100,000 times
5.Side of body: 150℃
产品详细描述:
一、原理性能和用途
原理性能：当被控制对象的温度发生变化时，温控器感温部内的工质产生相应的热胀冷缩的物理现象（工质体积变化），与感温部连通一起的膜盒产生膨胀或收缩。通过杠杆原理，带动开关通断动作，达到恒温目的。WYE系列液胀式温控器具有控温准确，稳定可靠，开停温差小，控温调节范围大，超载电流大等性能特点。
用途：主要用于家电行业（淋浴器、滚筒式洗衣机、暖风机），电热设备（不锈钢全自动开水器、嵌入式电烤箱、电热油炸锅、食品机械、YL设备），制冷行业（厨房冷柜、保鲜柜、冷库、制冰机、鱼池、冷饮机、暖气机）等控温用。
Principle of performance andApplication
When the temperature of the controlled object is changed,the inner
workingsubstanceof thermostatsensible bulb produce a corresponding
thermal expansion and contraction physical phenomenon (theworking substancevolume change), at which connected withthe diaphragm of sensible bulb
produceexpansion or contraction.Through the leverage to drive switch
on/off action, the purpose is to achieve constant temperature.F2000/A2000 series thermostats have temperature control accurate, reliable,
smalldifferential, temperature adjustmentrange, and large overload
current performance characteristics.
Usage: to beapplied to home Appliances industry(shower bath fitting、
tumbling-box washing machine, fan heater),electrical heating
appliance(Stainless steel automatic water boiler,built-in electric oven,
frying pan, food machinery, armarium,),Refrigeration industry(kitchen
refrigerator,chiller,cold Storage,ice maker,fishpond,Beverage
Machine, heater)for temperature control use.
二、注意事项：
1、用户必须根据自己产品的特点，所需控制的温度，提出订货型号和规格。
2、温控器安装时，感温管尽可能整支贴紧被控温表面，以达到控温准确的目的。
3、安装时不可将感温管压变形，以免影响其性能。
4、勿使导电气体或导电物质进入温控器内或污染温控器表面以免影响电气绝缘性能。
5、安装支架的M4机丝不要过长，否则会破坏温控器性能。
6、开关盒是电器陶瓷件要轻拿轻放，避免破坏。
7、毛细管折弯半径不能小于5mm.
Attentions
1,The client must be based onthe characteristics of their products,what needed the temperature controlling, brought forward the type and specification ordering goods
2, The whole bulb is supported closely alignscontrolled temperature
surfacewhile thermostat installation, to achieve accurate
temperature control purposes.3, The installation must not be a bulb pressure deformation, so as not
to affect its performance.4,Don't make electricity gas and electricity material in a thermostat
or contaminated thermostat surface to avoid affect the electrical
insulating performance.5, The M4 screw of mounting brackets is not too long, otherwise it
will damage thermostat performance.6,Switch box is that the electrical appliances ceramic part to handle gentlyand avoid damage7, The bending radius of capillary is not less than 5mm.
三、说明
1、转轴尺寸规格及其起始旋转角度需依客户之需求来设定
2、其跳脱温度及其特性曲线需依客户成品与温控匹配测试而定
3、端子尺寸规格和方向多种多样，毛细管和护套管长度可随客户任意选择
4、为方便客户安装温控器，温控器中还可焊接不同的直径的感温包
Third, note
1, The shaft sizes and rotation angles are to be set according to customer
Demand.
2, The off temperature and characteristic curve aredefinite according to matching test the temperature control with customer finished product
3,The client canarbitrarilychoose differentdimension specification and direction of terminal、the length ofcapillary and protective tube.4,For the convenient client assembles the thermostat,It can be welded
in the bulb of different diameter.
