OEM 功率传感器-以色列OPhir产品简介:OEM 功率传感器
| | Ophir是内置放大器的紧凑型一体化激光功率计传感器的先行者。这些传感器安装方便，同时可以给出与测量激光功率成正比的校准电压。它们包含了所有必须的电路系统，包括加速电路，可以将传感器的响应速度提高到1s、0-95%。与传感器的连接也很容易，由主机提供的直流电源，传感器提供与激光功率成正比的电压输出。基于微处理器的新型 UA 系列能够以各种方式进行设置之后提供功率或能量读取。 |
公司介绍:
香港奥德赛创科技有限公司产品主要有安规检测类产品、环境类试验箱、万能试验机、疲劳试验机、燃烧阻燃类试验设备各类检测仪器，并代理了美国ED&D、日本KYOKUTOU极东、日本极东、日本志贺、日本爱模、日本TEAC、日本LINIAX、日本日本NMB、日本NoiseKen、美国MONROE、美国ELECTRO-LITE、以色列ophir、德国WAZAU、德国PTL、德国PTI、OPHIR等国际知名品Pai检测仪器。
深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。欢迎各界朋友莅临参观、指导和业务洽谈。请联系销售总监：苏曼
OEM 功率传感器-以色列OPhir参数规格:
Model 20C-SH 20C-UAS 20C-UAU
Type Smart sensor Digital R5232 connection
Analog or digital output
Digital USB connection
digital output.
Features Compact smart sensor Small size, built in amplifier Small size, amplifier
not built in
Absorber Type Broadband Broadband Broadband
Spectral Range µm 0.19 - 20 0.19 - 20 (c) 0.19 - 20 (c)
Aperture mm φ12 φ12 φ12
Power Mode
Maximum power (a) free standing 4W continuous, 4W continuous, 4W continuous,
20W for 1.8 min 20W for 1.8 min 20W for 1.8 min
heat sinked 20W 20W 20W
Minimum power 10mW 10mW 10mW
Power Noise Level 0.2mW 0.2mW 0.2mW
Maximum Average Power Density
kW/cm2
23 at 20W 35 at 4W 23 at 20W 35 at 4W 23 at 20W 35 at 4W
Response Time (0-95%), typ. (sec) 0.8 0.8 0.8
Power Accuracy +/-% at calibrated
wavelength
3 3 3
Linearity with Power +/-% 1 1 1
Amplifier power supply (for UA,
UAS, UAU versions)
NA +6V to +24V Via host USB
Energy Mode
Maximum Energy 10J 10J 10J
Minimum Energy 6mJ 6mJ 6mJ
Energy Accuracy +/-% at calibrated
wavelength
5 5 5
Maximum Energy Density J/cm2
<100ns 0.3 0.3 0.3
0.5ms 2 2 2
2ms 2 2 2
10ms 2 2 2
Cooling conduction conduction conduction
Output Ophir smart plug 6 pin Molex (b) Mini B USB connector
Dimensions 38x38x14mm 38x38x34mm 38x38x14mm
Part number 7Z02602 Consult Ophir representative Consult Ophir representative
Note: (a) With analog "UA/UAS" version, maximum power is also limited by maximum output voltage where output voltage is at most 2V less than input voltage.
Note: (b) 6 pin Molex connections: RS232 input, Ground, +Voltage, Analog signal out, high/low voltage or switch input when used, RS232 output
Note: (c) Calibrated at customer selected wavelength
