OSC-1030 二手仪器韩国30兆双踪模拟示波器OSC-1030

类型	模拟示波器	品Pai	韩国
型号	OSC-1030	通道数	2
带宽	30（MHz）

FeaturesFrequency:DC～30MHz,DC～60HzTrigger:30MHz,60MHzVert TriggerVertical Sensitivity:5mV(MAG 1mV)Channel:2CHTrace:2Cooling Fan SystemGood DesignAccessoriesOperator's Manual:1EASpare Fuse:1EAPower Cord:1EATest Probe(Option):1EASpecifications

ITEM			OSC-1030
CRT	Configuration and Useful Screen		6-Inch Rectangular Screen with Internal Graticule:8×10div(1div=1cm) Marking for Measurement of Rise Time 2 mm Subdivisions Along Central Axis.
	Accelerating Potential		+1.9KV Approx.(Ref.Cathode)
	Phosphor		P31(Standard)
	Focussing		Possible(With Auto-Focus Correction Circuti)
	Trace Rotation		Provided
	Intensity Control		Provided
Z-AXIS INPUT (INTENSITY MODULATION)	Input Signal		Positive Going Signal Decreases Intensity +5 Vp-p or More Signal Cases Noticeable Modulation at Normal Intensity Settings
	Bandwidth		DC to 2 MHz(-3 dB)
	Coupling		DC
	Input Impedance		20kΩ - 30kΩ Typical
	Maximum Input Voltage		30V(DC+Peak AC)
VERTICAL DEFLECTION	Bandwidth (-3dB)	DC Coupled	DC to 30 MHz Normal , DC to 10 MHz Magnified
		AC Coupled	10 Hz to 30 MHz Normal,10 Hz to 10 MHz Magnified
	Modes		CH1,CH2,DUAL,ADD,ALT,CHOP
	Deflection Factor		5mV/div to 5V/div in 11 Calibrated Steps of A 1-2-5 Sequence Continuously Variable Between Steps at Least 1:2:5
	Accuracy		Normal:±3%,Magnified,±5%
	Input Impedance		1MΩ in Parallel with Approx.30pF
	Maximum Input Voltage		Direct 400 V (DC+ Peak AC) ,with Probe : Refer to Probe Specification
	Input Coupling		DC- GND -AC
	Rise Time		11.67 ns or Less (35ns or Less:×5MAG)
	CH1 Out		20 mV/div into 50Ω:DC to 10 MHz(-3dB)
	Polarity Inversion		CH2 Only
HORIZONTAL DEFLECTION	Display Modes		Normal , X-Y,×10,Variable
	Time Base		0.1μs/div to 0.2s/div in 20 Calibrated Steps.1-2-5 Sequence. Uncalibrated Continuous Control Between Steps at Least 1:2:5
	Sweep Magnification		10 Times (Maximum Sweep Rate: 10 ns/div)
	Accuracy		±3%, ±5% (0 ℃ To 40 ℃), Additional Error for Magnified ±2%
TRIGGER SYSTEM	Modes		AUTO, NORM, TV-V, TV-H
	Source		CH1, VERT (CH1, CH2), EXT, LINE
	Coupling		AC
	Slope		+ or -
	Sensitivity and Frequency Auto (30Hz or More), Norm		OSC-1030 INT EXT DC-2MHz 0.5div 0.2Vp-p 2MHz-20MHz 1.5div 0.6Vp-p 21MHz-30Mhz 2.0div 0.6Vp-p
	TV-V, TV-H		At Least 1 div or 1.0 Vp-p
	External Trigger Input Impedance		1MΩ (In parallel with Approx.25pF)
	Max Input voltage		400V(DC+Peak AC)
X-Y OPERATION	X-Axis		(Same as CH1 Except for The Following) Deflection Factor : Same as That of CH1 Accuracy : ±5%
	Y-Axis		Same as CH2
	X-Y Phase Difference		3° or Less (At DC to 50 KHz)
CALIBRATOR	Prebe Adjustment		1 KHz (±20%) Frequency, 0.5V(±20%) Square Wave Duty Ratio: 40-60%
POWER SUPPLY	Voltage Range		Voltage Range Fuse (250V) UL198G IEC127 115V/AC 1.2L F1.2L 230V/AC 0.63AL F0.63AL
	Frequency		50/60 Hz
	Power Consumption		Max 45 W
PHYSICAL CHARACTERISTICS	Weight		8.2kg
	Size		370mm(W)×137mm(H)×416mm(D)
ENVIRONMENTAL CHARACTERISTICS	Temperature		Temperature Range for Rated Operation: +10℃ to +35℃(+50℉ to +95℉) Max Ambient Operating Temperature: 0℃ to 40℃(+32℉ to +104℉) Max Storage Temperature: -20℃ to +70℃(-4℉ to +158℉)
	Humidity		Range for rated Operation: 45% To 85% RH/Max Ambient Operating Humidity :35% To

北京迅捷飞亚电子科技有限公司地址：北京市海淀区清河新城2号楼2单元1704： 81236258：张女士网址：WWW.SELL17.CN邮箱：QQ: 296851597