| General specifications |
| Signal type | Analog input |
| Supply |
| Connection | Power Rail or terminals 23+, 24- |
| Rated voltage | 20 ... 30 V DC |
| Rated current | approx. 130 mA |
| Power loss | 2 W |
| Power consumption | 2.5 W |
| Input |
| Connection | terminals 1, 2, 3 |
| Input I | |
| | Input signal | 0/4 ... 20 mA |
| | Available voltage | ≥ 15 V at 20 mA |
| | Open circuit voltage/short-circuit current | 24 V / 33 mA |
| | Input resistance | 45 Ω (terminals 2, 3) |
| | Lead monitoring | breakage I < 0.2 mA; short-circuit I > 22 mA acc. to NAMUR NE43 |
| Output |
| Connection | output I: terminals 10, 11, 12
output II: terminals 16, 17, 18
Output: analog terminals 8+, 7- |
| Output signal | 0 ... 20 mA or 4 ... 20 mA |
| Output I, II | signal, relay |
| | Contact loading | 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 V DC / 2 A |
| | Mechanical life | 5 x 107 switching cycles |
| | Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Output III | Signal, analog |
| | Current range | 0 ... 20 mA or 4 ... 20 mA |
| | Open loop voltage | max. 24 V DC |
| | Load | max. 650 Ω |
| | Fault signal | downscale I ≤ 3.6 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43) |
| Directive conformity |
| Electromagnetic compatibility | |
| | Directive 2004/108/EC | EN 61326-1:2006 , EN 61000-6-4:2007 |
| Low voltage | |
| | Directive 2006/95/EC | EN 50178:1997 |
| Conformity |
| Insulation coordination | IEC 62103 |
| Electrical isolation | IEC 62103 |
| Electromagnetic compatibility | NE 21 |
| Protection degree | IEC 60529 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Protection degree | IP20 |
| Mass | 300 g |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 in) , housing type C3 |
