CPX200DP直流电源,英国tti CPX200DP的产品说明：
CPX200DP
Bench/System DC Power Supply, PowerFlex Regulation, Smart Analog Controls Dual Outputs, 2 x 60V/10A 180W, USB, RS232, LAN & GPIB InterfacesThe CPX200D and CPX200DP are the latest variants of the CPX series and replac the best-selling CPX200.
PowerFlex regulation enables the 360 watts of total power to be configured to suit each specific application.
The two 180 watt outputs can each supply up to 60 volts or up to 10 amps. See below for power curve.
Isolated tracking enables the outputs to be wired in series or parallel whilst controlled from a single voltage adjustment for up to 120 volts or 20 amps.
The CPX200DP includes rear terminals and USB, RS232, GPIB and LXI compliant LAN interfaces.
CPX200DP直流电源,英国tti CPX200DP的产品描述：PowerFlex design gives variable voltage and current combinations within a maximum power range
Up to 60 volts and up to 20 amps
180 watts or 420 watts maximum per output
Isolated outputs can be wired in series or parallel
Constant voltage or constant current operation
Settings Locking (S-Lock)
PowerFlex or fixed-range operation
Variable OVP trips
Selectable remote sense terminals
Compact quarter or half rack 3U case size
Isolated analogue remote control (CPX400SA only)
RS232, USB, GPIB & LXI compliant LAN (P models only)
 |
Choose voltage and current combinations
to suit your applications ! | | | The CPX series is a different type of laboratory power supply designed to meet the need for flexibility in the choice of voltage and current.
A conventional PSU has a fixed maximum current limit giving a power capability that reduces directly with the output voltage.
The TTi PowerFlex design of the CPX series enables higher currents to be generated at lower voltages within an overall power limit envelope.
Each output can provide considerably higher current than a conventional PSU of the same maximum voltage and power (see power curve).
Example voltage & current combinations for the CPX400S and CPX400D include 60V/7A, 42V/10A, 28V/1, and 20V/20A.
Example voltage & current combinations for the CPX200D include 60V/3A, 36V/, 24V/7A, and 16V/10A.
|
 Read about range control and custom limits
| | |
| | Low noise and good transient response | | | The CPX Series uses linear final regulation to achieve low output noise even at full power levels.
The linear regulator also ensures good transient response which is up to ten times faster than a conventional switch-mode power supply
| | Dual Independent Outputs (D models) | | | The CPX200D and CPX400D have two completely independent and isolated outputs.
Each output can therefore be used as a separate power supply, each capable of providing up to 180/420 watts of power.
Where higher currents, higher voltages, or tracking voltages are required, the V-Track function can be used. |
|
