产品库

南非CCG铠装防爆格兰(CCG FLP-TR, FLP HOSE cable gland)

产品信息

南非CCG铠装防爆格兰(CCG FLP-TR,  FLP HOSE cable gland)


 
CCG Products are produced under the quality management system ISO9001-2000 standard underwritten by UL USA. CCG Products are internationally certified to British, CENELEC/ATEX, Chinese, South African IEC and Australian standards where applicable.
 

 

  
FLP-TR EExd I / IIC Compression Gland for use with flexible cable
For use in hazardous areas
   
 FLP Hose EExd I / IIC Compression Gland for use with flexible cable 
For use in hazardous areas
  
 FLP EExd I / IIC Captive Component Gland MAC - Multi Armour Cone
For use in hazardous areas
   
 Armortex EExd I / IIC Gland MAC - Multi Armour Cone 
For use in hazardous areas

 

 

 

 
 
FLP-TR EExd I / IIC compression gland 
for use with unarmoured cable

Features and Benefits
•Fitted with specially formulated captive elastomeric seals, built-in safety.
•No loose parts that can get lost.
•Provided with an extra hard gripper seal to grip cable.
•Manufactured from high quality brass, nickel plated and stainless steel.
•Complete with an orange thread cap/safety gauge for correct 
  gland selection.
 

 
 
 
Technical Data
TypeFLP TR
Gland MaterialBrass (Nickel Plated), Stainless Steel
Seal MaterialThermoplastic Elastomer
Cable TypeUnarmoured TRS
Sealing AreaOuter sheath
Optional AccessoriesShroud, Adaptor/Reducer
Download Data Sheet Download Assembly Instructions
 
Standards and Certifications

Hazardous Area Classification

 

SANS/SABS IEC

Zone 1, 2, 21and 22 Exd I / IIC, Exe I / IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde I / II 2 GD, EExd I M2

Compliance Code

Certification No.

CENELEC / ATEX

 

EN50014:1997E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50018:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50019:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

SANS / SABS / IEC

  

SANS 808

SABS MS/W 454U

SANS/SABS IEC 60079-0

2000

SABS MS/W 454U

SANS/SABS IEC 60079-1

2001

SABS MS/W 454U

SANS/SABS IEC 60079-7

2001

SABS MS/W 454U

SANS/SABS IEC 60529

1989

SABS MS/W 454U

SANS/SABS IEC 61241.1.1

1999

SABS MS/W 454U

CHINESE

GB3638. 1-2000 part 1

 

CNEx09 0428U

GB3638. 2-2000 part 2

 

CNEx09 0428U

GB3638. 3-2000 part 3

 

CNEx09 0428U

GB12476. 1-2000

 

CNEx09 0428U

Ingress ProtectionIP66/67/68
Operating Temperature-30?C to + 130?C
Download ECS 06 ATEX 2044 FLP TR Cable Gland
Download Certification DEMKO 01 ATEX 130325X
Download Certification CNEx09 0428U
Download Permit No SANS 808
Download Certification SABS MS/W454U

Special Conditions for Safe Use - X
Glands that incorporate a seal with an uncompressed height of less than 20mm shall not be used with EEX d IIC apparatus that has a volume in excess of 2000cc. If mounted in flame proof enclosures, make sure that at least threads are engaged and that the depth of engagement of enclosures smaller than 100 cm3 are at least 5mm and for enclosures larger than 100 cm3 at least 8mm.

 

 

 

 
 
FLP Hose EExd I / IIC compression gland 
for use with unarmoured cable

Features and Benefits
•Fitted complete with a specially formulated elastomeric captive seal for built-in safety.
•Complete with a spigot to attach a hose for cable protection.
•Manufactured from high quality brass, nickel plated and stainless steel.
•Complete with an orange thread cap / safety gauge for correct gland selection.
 

 
 
 
Technical Data
TypeFLP Hose
Gland MaterialBrass (Nickel Plated), Stainless Steel
Seal MaterialThermoplastic Elastomer
Cable TypeUnarmoured TRS
Sealing AreaOuter sheath
Optional AccessoriesShroud, Adaptors/Reducers
Download Data Sheet Download Assembly Instructions
 
Standards and Certifications

Hazardous Area Classification

 

SANS/SABS IEC

Zone 1, 2, 21and 22 Exd I / IIC, Exe I / IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde I / II 2 GD, EExd I M2

Compliance Code

Certification No.

CENELEC / ATEX

 

EN50014:1997E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50018:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50019:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

SANS / SABS / IEC

  

SANS 808

SABS MS/W 453U

SANS/SABS IEC 60079-0

2000

SABS MS/W 453U

SANS/SABS IEC 60079-1

2001

SABS MS/W 453U

SANS/SABS IEC 60079-7

2001

SABS MS/W 453U

SANS/SABS IEC 60529

1989

SABS MS/W 453U

SANS/SABS IEC 61241.1.1

1999

SABS MS/W 453U

CHINESE

GB3638. 1-2000 part 1

 

CNEx09 0428U

GB3638. 2-2000 part 2

 

CNEx09 0428U

GB3638. 3-2000 part 3

 

CNEx09 0428U

GB12476. 1-2000

 

CNEx09 0428U

Ingress ProtectionIP66/67/68
Operating Temperature-30?C to + 130?C
Download ECS 06 ATEX 2044 FLP HOSE Cable Gland
Download Certification DEMKO 01 ATEX 130325X
Download Certification CNEx09 0428U
Download Permit No SANS 808
Download Certification SABS MS/W453U
 

Special Conditions for Safe Use - X
Glands that incorporate a seal with an uncompressed height of less than 20mm shall not be used with EEX d IIC apparatus that has a volume in excess of 2000cc. If mounted in flame proof enclosures, make sure that at least threads are engaged and that the depth of engagement of enclosures smaller than 100 cm3 are at least 5mm and for enclosures larger than 100 cm3 at least 8mm.

 

 

 

 
 
FLP EExd I / IIC captive cone gland 
MAC - Multi Armour Cone

Features and Benefits
•Two part handling, freely rotating captive cone for earth continuity 
  and armour clamping.
•Factory fitted with a specially formulated elastomeric seal provides 
  built-in safety.
•No loose parts that can get lost.
•Manufactured from high quality brass, nickel plated and stainless steel.
•Complete with an orange thread cap / safety gauge for correct gland selection.
 

 
 
 
Technical Data
TypeFLP
Gland MaterialBrass (Nickel Plated), Stainless Steel
Seal MaterialThermoplastic Elastomer
Cable TypeSteel Wire, Braid, Tape Armour
Armour ClampingCaptive Cone and Cone Ring
Sealing AreaInner sheath
Optional AccessoriesShroud, Adaptor/Reducer
Download Data Sheet Download Assembly Instructions
 
Standards and Certifications

Hazardous Area Classification

 

SANS/SABS IEC

Zone 1, 2, 21and 22 Exd I / IIC, Exe I / IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde I / II 2 GD, EExd I M2

Compliance Code

Certification No.

CENELEC / ATEX

 

EN50014:1997E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50018:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50019:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

SANS / SABS / IEC

  

SANS 808

SABS MS/W 455U

SANS/SABS IEC 60079-0

2000

SABS MS/W 455U

SANS/SABS IEC 60079-1

2001

SABS MS/W 455U

SANS/SABS IEC 60079-7

2001

SABS MS/W 455U

SANS/SABS IEC 60529

1989

SABS MS/W 455U

SANS/SABS IEC 61241.1.1

1999

SABS MS/W 455U

CHINESE

GB3638. 1-2000 part 1

 

CNEx09 0428U

GB3638. 2-2000 part 2

 

CNEx09 0428U

GB3638. 3-2000 part 3

 

CNEx09 0428U

GB12476. 1-2000

 

CNEx09 0428U

Ingress ProtectionIP66/67/68
Operating Temperature-30?C to + 130?C
Download ECS 06 ATEX 2044 FLP Cable Gland
Download Certification DEMKO 01 ATEX 130325X
Download Certification CNEx09 0428U
Download Permit No SANS 808
Download Certification SABS W455U

Special Conditions for Safe Use - X
Glands that incorporate a seal with an uncompressed height of less than 20mm shall not be used with EEX d IIC apparatus that has a volume in excess of 2000cc. If mounted in flame proof enclosures, make sure that at least threads are engaged and that the depth of engagement of enclosures smaller than 100 cm3 are at least 5mm and for enclosures larger than 100 cm3 at least 8mm.

 

 

 

 
 
Armortex EExd I / IIC Gland 
MAC - Multi Armour Cone

Features and Benefits
•Nickel plated brass / stainless steel gland for steel wire, tape, braided, aluminium, armoured cable
•No need to change seals or reverse cones or cone rings to accommodate 
  different types of armoured cable.
•Captive cone and cone ring ensures no loose parts during assembly.
•Extra long captive explosion proof seal ensures built in safety.
•Armour clamp components can be inspected after installation.
•Gland can be used on Exd enclosures greater than 2 litres volume.
 

 
 
 
Technical Data
TypeARMORTEX
Gland MaterialBrass (Nickel Plated), Stainless Steel
Seal MaterialThermoplastic Elastomer
Cable TypeSteel Wire, Braid, Tape Armour
Armour ClampingMulti Armour Cone and Cone Ring
Sealing AreaInner and outer sheath
Optional Accessories and ToolsShroud, Earth Tag, Adaptor / Reducer
Download Data Sheet Download Assembly Instructions
 
Standards and Certifications

Hazardous Area Classification

 

SANS/SABS IEC

Zone 1, 2, 21and 22 Exd I / IIC, Exe I / IIC and DIP

CENELEC / ATEX

Category 2, Category 3, EExde I / II 2 GD, EExd I M2

Compliance Code

Certification No.

CENELEC / ATEX

 

EN50014:1997E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50018:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50019:2000E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

EN50281-1-1:1999E

DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044

SANS / SABS / IEC

  

SANS 808

SABS MS/W446U

SANS/SABS IEC 60079-0

2000

SABS MS/W446U

SANS/SABS IEC 60079-1

2001

SABS MS/W446U

SANS/SABS IEC 60079-7

2001

SABS MS/W446U

SANS/SABS IEC 60529

1989

SABS MS/W446U

SANS/SABS IEC 61241.1.1

1999

SABS MS/W446U

CHINESE

GB3638. 1-2000 part 1

 

CNEx09 0428U

GB3638. 2-2000 part 2

 

CNEx09 0428U

GB3638. 3-2000 part 3

 

CNEx09 0428U

GB12476. 1-2000

 

CNEx09 0428U

Ingress ProtectionIP66/67/68
Operating Temperature-30?C to + 130?C
Download ECS 06 ATEX 2044 Armortex Cable Gland
Download Certification DEMKO 01 ATEX 130325X
Download Certification CNEx09 0428U
Download Permit No SANS 808
Download Certification SABS MS/W446U

Special Conditions for Safe Use - X
Glands that incorporate a seal with an uncompressed height of less than 20mm shall not be used with EEX d IIC apparatus that has a volume in excess of 2000cc. If mounted in flame proof enclosures, make sure that at least threads are engaged and that the depth of engagement of enclosures smaller than 100 cm3 are at least 5mm and for enclosures larger than 100 cm3 at least 8mm.

 

ZG区分销商:
上海颐品自动化科技有限公司

Shanghai Epin Automation Co.,Ltd.

Website:www.epinautomation。。com
:sales@epinautomation.com
全国免费:

因为专业,所以放心!

 

信息声明:本产品供应信息由仪器网为您整合,供应商为(上海颐品自动化科技有限公司),内容包括 (南非CCG铠装防爆格兰(CCG FLP-TR, FLP HOSE cable gland))的品牌、型号、技术参数、详细介绍等;如果您想了解更多关于 (南非CCG铠装防爆格兰(CCG FLP-TR, FLP HOSE cable gland))的信息,请直接联系供应商,给供应商留言!
供应商产品推荐
    您可能感兴趣的产品