Hawke防爆格兰（Hawke 755 Cable Gland/Connector）

UL认证Hawke防爆格兰（Hawke 755 Cable Gland/Connector）
Hawke防爆格兰（Hawke 755 Cable Gland/Connector）
上海颐品自动化，：
上海颐品自动化，：

Hawke 755 Cable Gland/Connector（American Series）For use with armoured jacketed cable, as permitted by the NEC.Application

Outdoor or indoor use.
For use with armoured jacketed cable, as permitted by the NEC.

Ordering Format [ Gland Type / Size / Thread / Material ]

Example: 755 / C / 1" NPT / Brass

Features

Provides a barrier seal between the individual insulated conductors within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland/connector compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is coloured red to indicate hazardous locations product.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket.

Materials & Finishes

The 755 cable gland/connector is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.

Technical Data

1. UL Listing No:
   E84940.
2. Suitable for use in:
   Class 1, Division 2, Gas Groups A, B , C and D.
   Class 1, Zone 2, Gas Groups IIA, IIB and IIC.
   AExd IIC and AExe II Class 1, Zone 2.
3. Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb, Dust Extb IIIC Db
   ExnR IIC Gc, Extc IIIC Dc
4. Certificate No's
   Sira 06ATEX1295X, Sira 07ATEX4330X and IECEx Sir 06.0082X.
5. Suitable for use in:
   Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.
6. Construction and Test Standards:
   UL 2225, IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 60079-31.
7. Ingress Protection:
   IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
8. Deluge Protection to:
   DTS01
9. Operating Temperature Range:
   -50°C to +60°C (UL) and -60°C to +80°C (ATEX / IECEx)
10. Note: 755 cable glands are supplied dual ATEX/UL marked as standard.
11. Assembly Instruction Sheet:
    AI 319 (UL).
12. AI 382 (ATEX / IECEx).

CABLE GLAND/CONNECTOR SELECTION TABLE
Size Ref.	Entry Thread Size			Cable Acceptance Details								‘G’ Compressed Length	Hexagon Dimensions
				Inner Sheath/Cores			‘B’ Outer Jacket		‘C’
	NPT		Metric *	‘D’ Max. Over Cores	‘E’ Max. Inner Sheath	Max. No. Of Cores							Across Flats	Across Corners
	Standard	Option					Min.	Max.	Steel Wire Armour ††	Braid	Tape
Os	½"	-	M20 ‡	0.35"	0.46"	6	0.22"	0.47"	0.036" / 0.049"	0.008" / 0.013"	0.008" / 0.031"	2.61"	0.94"	1.09"
O	½"	-	M20 ‡	0.35"	0.46"	6	0.37"	0.63"	0.036" / 0.049"	0.008" / 0.013"	0.008" / 0.031"	2.61"	0.94"	1.09"
A	½"	¾"	M20	0.43"	0.49"	10	0.49"	0.81"	0.036" / 0.049"	0.008" / 0.013"	0.008" / 0.031"	2.65"	1.18"	1.36"
B	¾"	1"	M25	0.64"	0.72"	21	0.66"	1.02"	0.049" / 0.062"	0.008" / 0.013"	0.008" / 0.039"	2.75"	1.42"	1.64"
C	1"	1¼"	M32	0.86"	0.97"	42	0.87"	1.30"	0.062" / 0.078"	0.008" / 0.013"	0.008" / 0.055"	2.93"	1.81"	2.09"
C2	1¼"	1½"	M40	1.04"	1.16"	60	1.10"	1.61"	0.062" / 0.078"	0.008" / 0.013"	0.008" / 0.070"	3.15"	2.17"	2.50"
D	2"	1½"	M50	1.46"	1.64"	80	1.42"	2.07"	0.078" / 0.098"	0.008" / 0.013"	0.008" / 0.070"	3.14"	2.56"	2.96"
E	2½"	2"	M63	1.88"	2.11"	100	1.81"	2.57"	0.098"	0.008" / 0.013"	0.008" / 0.070"	3.42"	3.15"	3.64"
F	3"	2½"	M75	2.32"	2.61"/2.57" †	120	2.24"	3.07"	0.098"	0.008" / 0.013"	0.008" / 0.070"	3.61"	3.74"	4.31"
All dimensions in inches (except*). All metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting the standard NPT entry thread. ‡Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43". †† UL listing only applies to Steel Wire Armour.

 

 

 

 

ZG区分销商：
上海颐品自动化科技有限公司
Shanghai Epin Automation Co.,Ltd.

Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
全国免费: