Hawke防爆格兰（Hawke 153/RAC/L Cable Gland，E2W,E2X,E2Z）

Hawke防爆格兰（Hawke 153/RAC/L Cable Gland，E2W,E2X,E2Z）
Hawke防爆格兰（Hawke 153/RAC/L Cable Gland，E2W,E2X,E2Z）
Hawke防爆格兰（Hawke 153/RAC/L Cable Gland，E2W,E2X,E2Z）
上海颐品自动化，：

Hawke 153/RAC/L Cable GlandApplication

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath.

Ordering Format [ Gland Type / Size / Thread / Material / Options ]

Example with standard inner seal + bond option: 153/RAC / C / M32 / Brass / L

Example with alternative inner seal + bond option: 153/RAC / C / 1¼" NPT / Brass / K

Example with alternative clamping ring option: 153/RAC / C / 1¼" NPT / Brass / L / AR

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a seal and an electrical bond on the cables lead inner sheath.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

Materials & Finishes

The 153/RAC/L cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

Technical Data

1. Construction and Test Standards:
   EN 62444, BS 6121 : Part 1 Type E2W, E2X, E2Y and E2Z.
2. Ingress Protection:
   IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
3. Operating Temperature Range:
   -60°C to +80°C
4. Deluge Protection to:
   DTS01 (Deluge seal optional).
5. Assembly Instruction Sheet:
   AI 399 & AI336.

CABLE GLAND SELECTION TABLE
Size Ref.	Entry Thread Size			‘H’ Thread Length	Cable Acceptance Details								‘G’ Compressed Length	Hexagon Dimensions
					‘A’ Inner Lead Sheath				‘B’ Outer Sheath		‘C’ Armour/Braid
	Metric	NPT *			Standard Seal+Bond		Alternative Seal+Bond
														Across Flats	Across Corners
		Standard	Option		Min.	Max.	Min.	Max.	Min.	Max.	Orientation 1	Orientation 2
O	M20 ‡	½"	-	15	6.5	10.5	-	-	9.5	16.0	0.8 / 1.25	0 / 0.8	52.0	24.0	26.5
A	M20	¾"	½"	15	-	-	8.5	13.4	12.5	20.5	0.8 / 1.25	0 / 0.8	53.0	30.0	32.5
B	M25	1"	¾"	15	12.5	19.0	9.5	15.4	16.9	26.0	1.25 / 1.6	0 / 0.7	69.5	36.0	39.5
C	M32	1¼"	1"	15	19.0	25.0	14.5	21.2	22.0	33.0	1.6 / 2.0	0 / 0.7	64.0	46.0	50.5
C2	M40	1½"	1¼"	15	25.0	31.2	22.0	28.0	28.0	41.0	1.6 / 2.0	0 / 0.7	68.3	55.0	60.6
D	M50	2"	1½"	15	31.5	42.3/42.8 †	27.5	34.8	36.0	52.6	1.8 / 2.5	0 / 1.0	79.0	65.0	70.8
E	M63	2½"	2"	15	42.5	53.3/54.5 †	39.0	46.5	46.0	65.3	1.8 / 2.5	0 / 1.0	78.9	80.0	88.0
F	M75	3"	2½"	15	54.5	66.0/64.3 †	48.5	58.3	57.0	78.0	1.8 / 2.5	0 / 1.0	83.7	95.0	104.0
G	M80	3½"	-	20	67.0	70.0	-	-	75.0	89.5	2.0/3.5	0.0/1.0	95.6	106.4	115.0
H	M90	3½"	-	20	67.0	75.0	-	-	75.0	89.5	2.0/3.5	0.0/1.0	95.6	115.0	130.0
J	M100	4"	-	20	75.0	89.5	-	-	88.0	104.5	2.5/4.0	0.0/1.0	95.6	127.0	142.0
All dimensions in millimetres (except * where dimensions are in inches). O - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specifiy when ordering. † Smaller value is applicable when selecting reduced NPT entry option. ‡ Size O is available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm.

Alternative reversible armour clamping ring (RAC) Selection Table
Size Ref.	Steel Wire Armour/Braid/Tape
	Orientation 1	Orientation 2
B	0.9 / 1.25	0.5 / 0.9
C	1.2 / 1.6	0.6 / 1.2
C2	1.2 / 1.6	0.6 / 1.2
D	1.45 / 1.8	1.0 / 1.45
E	1.45 / 1.8	1.0 / 1.45
F	1.45 / 1.8	1.0 / 1.45