Renishaw 雷尼绍TS27R对刀和刀具破损在线检测系统_详细资料

产品信息

品Pai：	RENISHAW	型号：	TS27R
测量范围：	±10°

加工ZX用刀具检测测头

产品型号：TS27R

产品名称：TS27R接触式对刀和刀具破损检测

在机床上精确测量刀具长度和直径无需机外对刀，可对旋转刀具进行长度或直径测量而不造成刀具或测针磨损，序中刀具破损检测可识别破损的刀具，避免工件报废，通过检测长度和直径来识别刀具，发现刀具的错装，雷尼绍可靠的测头机构可在数百万次触发中保持承诺的精度，测针有弱保护结构，可防止在碰撞情况下对测头的损害，有交换工作台的机床可选用ＯＴＳ光学传输式测头。

产品描述：

TS27R接触式对刀和刀具破损检测

●加工ZX用标准对刀测头

●超小型工作台安装

●精确的刀具长度和直径测量

●可检测旋转刀具而不会造成刀具或测针磨损

●测针有弱保护，可防止发生碰撞时损坏测头

About TS27R

TS27R is mounted on the machine table. Itenables the user to settool length and diameter of rotating tools, and to carry out broken tool detection.

As with all Renishaw hard-wired probe systems, TS27R requires theMI 8 interfaceto convert probe signals into an acceptable form for the CNC machine control.

TS27R features and benefitsThe standard tool setting probe for machining centresCompact table mountingPrecise tool length and diameter measurementRotating tools can be checked without wear to the tool or stylusStylus is protected by a weak link, preventing probe damage in the event of a collisionTS27R specificationSpecification

Sense directions	±X, ±Y, +Z
Weight	650g (23 oz)
Transmission type	Hard-wired
Uni-directional repeatability (max 2 sigma at stylus tip)	1.0 µm (0.00004 in)
Trigger force Lowest force Highest force	1.3 N (4.6 ozf) 2.4 N (8.5 ozf)
Stylus overtravel XY plane +Z direction	±10° 5.5mm (0.21 in)
Maximum recommended stylus length	Cranked stylus 27 x 33 mm (1.06 x 1.3 in)
Sealing	IP X8
Mounting	12 mm (0.5 in) T-bolt (not supplied). Optional spiral pins to allow accurate re-mounting.
Compatible interface	MI 8 /MI 8-4

Software for TS27R

Renishawtool setting softwareallows you to set tool length and diameter offsets for single point and multiple point tools, perform in cycle broken tool detection and manual or automatic (programmed) positioning.

信息声明：本产品供应信息由仪器网为您整合，供应商为（苏州瑞测精密仪器有限公司），内容包括（ Renishaw 雷尼绍TS27R对刀和刀具破损在线检测系统）的品牌、型号、技术参数、详细介绍等；如果您想了解更多关于（ Renishaw 雷尼绍TS27R对刀和刀具破损在线检测系统）的信息，请直接联系供应商，给供应商留言！

供应商产品推荐

您可能感兴趣的产品