产品库
登录
首页 找仪器 社区 百科 新品 供应商 品牌 应用 资料 仪企号 展会 标准 求购 招中标

WaveRunner HRO 64Zi 美国力科WaveRunner HRO 64Zi[信息已过期]

产品信息
类型数字示波器品Pai美国力科
型号WaveRunner HRO 64Zi通道数4
带宽400（MHz） 采样率见参数（GS/s）
记录长度见参数（k） 波形捕获率见参数（wfms/s）
外形尺寸见参数（mm） 重量见参数（kg）
是否提供加工定制否
Vertical System
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)400 MHz
(≥2 mV/div)
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)400 MHz (typical)
Rise Time (typical, 10-90%, 50 Ω)875 ps (typical)
Rise Time (typical, 20-80%, 50 Ω)650 ps (Typical)
Input Channels4
Bandwidth Limiters20MHz,100 MHz, 200MHz
Input Impedance50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 17 pF with supplied Probe
Input Coupling1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage50 Ω: 5V RMS ± 10V peak
1 MΩ: 400 V max. (DC + peak AC < 10 kHz)
Channel-Channel Isolation> 300:1 up to rated BW
Vertical Resolution12 bits; up to 15 bits with enhanced resolution (ERES)
Sensitivity50 Ω: 1 mV-1 V/div, fully variable;
1 MΩ: 1 mV-10 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy)±0.5% F.S., offset at 0V
Offset Range50 Ω:
±1.6 V @ 1 mV - 4.95 mV
±4 V @ 5mV - 9.9 mV
±8 V @ 10mV - 19.8 mV
±10 V @ 20mV - 1V
1 MΩ:
±1.6 V @ 1 mV - 4.95 mV
±4 V @ 5mV - 9.9 mV
±8 V @ 10mV - 19.8 mV
±16 V @ 20mV - 100 mV
±80 V @ 102mV - 198 mV
±160 V @ 200mV - 1V
±400V @ 1.02 V-10 V/div











DC Vertical Offset Accuracy±(1% of offset setting +0.2% of full scale + 0.02% max offset + 1 mV)
Horizontal System
TimebasesInternal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division RangeReal-Time: 20 ps/div-1600 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1600 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s)
Clock Accuracy≤ 1.5 ppm +(aging of 0.5 ppm/yr from last calibration)
Time Interval Accuracy< 0.06 / SR + (clock accuracy* Reading) (rms)
Trigger and Interpolator Jitter≤ 6 psrms(typical)
<0.1 ps RMS (typical, software assisted)
Sample Rate and Delay Time AccuracyEqual to Clock Accuracy
Channel-Channel Deskew Range±9 x time/div. Setting, 100 ms max., each channel
External Timebase Reference (Input)10MHz +/-25ppm via Lbus BNC adaptor
External Timebase Reference (Output)10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used by user (internal or external reference)
via Lbus BNC adaptor
External ClockDC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies.
Acquisition System
Single-Shot Sample Rate/Ch2 GS/s on 4 Ch
Random Interleaved Sampling (RIS)100 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time2 us
Memory Options (4 Ch / 2 Ch / 1Ch)L-128 Option:
128M / 128M / 128M
(60,000)
XL - 256 Option:
256M / 256M / 256M
(125,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)64M/64M/64M
(30,000)
Acquisition Processing
AveragingSummed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)From 12.5 to 15 bits vertical resolution
Envelope (Extrema)Envelope, floor, or roof for up to 1 million sweeps
InterpolationLinear or Sin x/x
Triggering System
ModesNormal, Auto, Single, and Stop
SourcesAny input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
Coupling ModeDC, AC, HFRej, LFRej
Pre-trigger Delay0- of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay0-50,000,000,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by TimeFrom 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range±4.1 div from center (typical)
Trigger Sensitivity with Edge Trigger (Ch 1¨C4) ProBus Inputs2 div @ < 400 MHz
1.5 div @ < 200 MHz
0.9 div @ <10 MHz
(DC, AC, and LFRej coupling, ≥ 10 mV/div, 50 Ω)
External Trigger Sensitivity, (Edge Trigger)2 div @ < full Bandwidth
1.5 div @ < 300 MHz
1 div @ <200 MHz
0.9 div @<10 MHz
(DC, AC, and LFRej coupling)
External Trigger Input RangeExt (±0.4 V); Ext/10 (±4 V)
Max. Trigger Frequency, SMART Trigger400 MHz @ ≥ 10 mV/div
(minimum triggerable width 1.9 ns)
Basic Triggers
EdgeTriggers when signal meets slope (positive, negative, or either) and level condition.
WindowTriggers when signal exits a window defined by adjustable thresholds
TV-Composite VideoTriggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
SMART Triggers
State or Edge QualifiedTriggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified FirstIn Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
DropoutTriggers if signal drops out for longer than selected time between 1 ns and 20 s.
PatternLogic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
SMART Triggers with Exclusion Technology
GlitchTriggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern)Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern)Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
RuntTrigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew RateTrigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion TriggeringTrigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
Cascade (Sequence) Triggering
CapabilityArm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on "A" event, then Qualify on "B" then "C" event, and Trigger on "D" event
TypesA, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, Pattern (analog), or Measurement.
HoldoffHoldoff between A and B, B and C, C or D, or any is selectable by time or number of events
ResetReset between A and B, B and C, C and D, or any combination is selectable in time or number of events
Measurement Trigger
Measurement TriggerTrigger on Measurement with qualified limits. Can be used as only trigger or last event in cascade.
Low Speed Serial Protocol Triggering (Optional)
Optionally available"I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, MIL-STD-1553, USB 1.x/2.0
Color Waveform Display
TypeColor 12.1" widescreen flat panel TFT-Active Matrix with high resolution touch screen
ResolutionWXGA; 1280 x 800 pixels.
Number of tracesDisplay a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid StylesAuto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform RepresentationSample dots joined, or sample dots only
Internal Waveform Memory
Internal Waveform Memory4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
LeCroy WaveStream? Fast Viewing Mode
Intensity256 Intensity Levels, 1- adjustable via front panel control
TypesAnalog only
Number of Channelsup to 4 simultaneously
Max Sampling Rate2 GS/s
Waveforms/second (continuous)up to 20,000 Waveforms/second
OperationFront panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
信息声明：本产品供应信息由仪器网为您整合，供应商为（济南金力通电子设备有限公司），内容包括 （WaveRunner HRO 64Zi 美国力科WaveRunner HRO 64Zi[信息已过期]）的品牌、型号、技术参数、详细介绍等；如果您想了解更多关于 （WaveRunner HRO 64Zi 美国力科WaveRunner HRO 64Zi[信息已过期]）的信息，请直接联系供应商，给供应商留言！
供应商产品推荐
    您可能感兴趣的产品